T8120Ex20 Line Boring Machine
Features:
1. This kind of line boring machine is repairing machine tools with high efficiency and high precission.
2. They can be used for boring master bushing and bushing of engine & generator's cylinder body
in automobiles, tractors and ships etc.
3. The motor of main spindle adopts the frequency conversion invertor which can ensure
the wide boring range and different material boring.
4. The maximum length of cylinder block can be up to 2500mm
5. Hardened boring bar can ensure the high hardness and good rigidity so as to improve the working accuracy.
6. Professional measuring gauges supplied with machine makes sure the accurate working.
Main Specification:
Model | T8120Ex20 | T8125Ex25 |
Range of hole diameter to be bored | φ36-φ200mm | φ36-φ200mm |
Max. length of cylinder body to be bored | 2000mm | 2500mm |
Max. extending length of main spindle | 300mm | 300mm |
Main shaft rotating speed (Frequency conversion stepless speed) | 200 - 960rpm/min | 200 - 960rpm/min |
Spindle feed rate of per revolution (Stepless speed regulation) | 0 - 180mm/min | 0 - 180mm/min |
Distance between spindle axis and bed surface of machine | 570 - 870mm | 570 - 870mm |
Motor power (Frequency conversion) | 1.5kw | 1.5kw |
Overall diemension(LxWxH) | 3910x650x1410mm | 4410x650x1410mm |
N.W/G.W | 2100/2300kg | 2200/2400kg |
Standard accessory:
Boring bar(32,60,45mm), Auxiliary boring support, boring sleeve, Auxiliary boring sleep, Bracket of boringbar, Block, Locating block, Spanner of ratchet, Handle, Centering cone sleeve, Micro-adjuster of boring cutter, Calibrating cutter meter, Centering meter, Caliber meter, Boring cutter, enlarged cutter disk, foundation bolt, Hex nut, washer
Optional accessory:
Boring bar 22mm
tools measuring device
Boring bar | 22 | 32 | 45 | 60 |
boring range | 22-40 | 32-50 | 45-60 | 60-90 |
with Enlarged cutter disk |
|
| up to 150 | up to 200 |
dimension | φ22x1000 | φ32x2075 | φ45x2525 | φ60x2525 |
boring sleeve | 1 | 2 | 2 | 2 |
Auxiliary boring sleeve |
| 2 | 2 | 2 |
Centering cone sleeve |
| 2 | 2 | 2 |
Enlarged cutter disk |
|
| 1 | 1 |
Boring cutter(2 sets) | φ8×28, φ8×36,φ10×46, φ10×56,φ10×66 | |||
Auxiliary boring support | 2 | |||
Bracket of boring bar | 1 | |||
Locating block | 4 |
Machine real photos: