NBC400 Pulse MIG CO2 Aluminum Welder
NBC400 Pulse MIG CO2 Aluminum Welder
1. MCU + DSP digital control, control waveform exactly, one pulse drop of the transition implementation.
2. Minimal welding spatter, good metal soldering rate, good weld forming, small welding deformation.
3. These series machines have clear up the wire ball when end ARC, using sophisticated control arc, in high igniting rate.
4. Digital control panel, a unified regulator.
5. Built-welding expert database systems, automatic intelligent combinations of the welding parameters.
6. According to welding characteristics use surface tension of transition technology, filling and facing Welded Joints.
7. With a two-step, four step-by-step, special four-step three modes of operation. At length the provisions of welding, the four-step / special four-step function can reduce labor intensity and improve welders soldering joint quality.
8. Can store 86 sets of user-defined parameters.
9. Distribution fully enclosed wire feeder, small size, ease of movement, against dust and rain.
PULSE MIG/MAG WELDING MACHINE | NBC400 Pulse |
Input Voltage | AC.(Three-phase) 380V ±15% |
Rated input current | 38A |
Rated input power | 25KVA |
Voltage Regulator range | 15-42V |
No-load voltage | 72V |
Output current range | 50-400A |
Feeding speed | 1.5-19m/min |
Carbon Steel Wire | 0.8-1.2 |
Aluminum Wire | 1.0-1.2 |
Type of wire | Solid/drug |
Duty cycle | 60% |
Efficiency | 90% |
Power factor | 0.93 |
Insulation class | F |
Protection class of case | IP23 |
Cooling method | Air cold |
Overall dimension | 950*550*1450mm |
Gross weight | 85kg |
Weight wire feeding machine | 9kg |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier