Multi-strand Steel Wire Rope Sling Ferrule For Led Lights Accessories / Suspension Kit Steel Wire Cable Gripper

CHECK OUR OUR WIRE ROPE SLING

OSHA specifies that a wire rope sling shall be removed from service immediately if ANY of the following conditions are present :

• Broken Wires 
• Metal Loss 
• Distortion 
• Heat Demages 
• Bad End Attachment 
• Bent Hooks 
• Metal Corrosion 
• Pullyed Eye Splices 
• Unbalance 

We are happy to provide have stock free sample at the begining , to show our biggest sincerity & the best real products , freely to contact us if you need ( check namecard below or send inquiry to us ! ), we will all be there , come and join us !!

GENERAL INFORMATION

Figure 1 * Diameter Of Wire Ropes

The diameter of a wire rope is the diameter of circle which encloses all of the wires . When measuring wire rope it is important to take the greatest distance of the outer limits of the Crown's of two opposite strands. A measurement across the valleys will result in incorrect lower readings .

Figure 2 * Method of Measuring Diameter 

Cailper,fitted with jaws broad enough to cover not less than two adjacent strands 

Figure 3 * Safety Factor Of Wire Rope

It is difficult to fix the safety factor for each type of wire rope to be used for various equipments ,as this factor depends not only on the load carried,but also on the speed of rope working, the kinds of fitting used for rope ends,the acceleration and deacceleration ,length of rope,the number ,size and arrangements of sheave drums etc. The following safty factors are minimum requirements for safety and economy in the common installation .

Figure 4 * Rope Characteristics

This chart is purely an attempt to illustrate the relative characteristics of different constructions of wire rope as indicated in the text . No numerical scale is shown or intended .

QUALITY ASSURANCE 

GUOFENG has adopted its management policy of " best quality & Lead time assurance " through continuous technological advanced testing equipment and quality system to meet customer's targets on time and quality criteria .

GUOFENG has achieved ISO 9001:2000 in year 2003. We are the first chinese steel wire rope manufacture certified by JIS in 2001.

We obtained the ISO/TS 16949:2002 automobile industry quality system in November of 2004, and we are the first Chinese wire rope manuafcture being ceritified in this field .

 1. How do you design a Cable Wire Rope Assembly ?

Of course ,we have to know your application firstly and a number of  factors have to be considered, such as work load, safety  abrasion, environment ,cycle life, flexibility, cost, When we design the Wire Rope Assembly  . 

2. How to place an order?

We produce according to customers’ specifications,so you’d better give us complete information as specified below: 

Material,Diameter,Construction,Coating,Length,Packing,Quantity, Remarks

3. Are your products of good quality? How can I trust you?

Yes. We are a professional manufacturer of wire assemblies with 15 years producing experience in China .We have always been cooperating with domestic and overseas customers and partners with the first- class quality and service to make great achievements. If this is your first time to contact us, please trust us, we’ll not let you down.

4.  What’s the lead time of my order?

It was largely depend on the size of your order .normally ,15days . if you are in urgent need of it ,we will try my best to met your requirement.

If there any thing else we could do for you please don't be hebsitate to contact us ! We are happy to reply within 24 hours  ^^ . Thanks a lot