Moldable Splinting Material Low Temperature Thermoplastic Splinting Sheets

Orthopedic Thermoplastic splints sheets made of Low Temperature Thermoplastic.

Maidfirm Low Temperature Thermoplastic Material is a special synthetic polymer polyester (PCL), which is processed by a series of physical and chemical methods.

It is in a stable state when in drying space with room temperature.Temperature at 65℃-70℃, the material will soften, can be stretched and shaped on patient directly, and revert to type of rigidity feature at normal temperature.

Light weight, good plasticity, x-ray translucent, latex free, non-toxic, non-irritating to skin, antimicrobial and environment friendly with self-degradation.

Maidfirm can offer you a suitable and good quality of thermoplastic to make any kind of splints like static splints, dynamic splints for upper limb and lower limb, body orthostics ,post-operative splints and any brace of orthoses, ect.

Operation: 
Heat it in hot water at temperature 65℃-70 ℃ about 2 minutes ( different thickness in different heating time) , when it soften, take it out from water and use clean cloth to dry it. Meanwhile material temperature drops and feel it not to hot, then can directly mold on patien. After mold well and hold it in same position until material getting cool and rigidity, take out the molded material to cut well by scissors and smooth the edge to avoid hurt patien. Or using padding strip to wrap the edge. After that, put it back to patien and immoblizate it by hook and loop. In case need to adjust,

it can be partially adjusted by heat gun.

Maidfirm Thermoplastic precut splints & thermoplastic sheets details: 

(Re: Available Non-perforated or perforated for splints or sheets)

Guangzhou Maidfirm Medical Equipment Co.,ltd is one of leading manufactures specializing in R&D, production, marketing and service of low temperature thermoplastic sheets, medical splints and other radiotherapeutic location & orthopedics external fixation materials.