Mobile Wheel Hose Reel Sprinkler Watering Grow Rain Pipe Agriculture Fertigation Line Sprinkler Farm Automatic Irrigation System
After each operation, the reel type sprinkler shall be subject to daily maintenance according to the requirements of the product
Before the operation of the reel type sprinkler, the components shall be checked: the nozzle shall be firmly connected, the flow channel shall be smooth, the rotation shall be flexible, the reversing shall be reliable, the spring tightness shall be appropriate, and the parts shall be complete; The pipe fittings are intact and complete, the control gate valve and safety protection equipment can be opened and closed freely, the action is flexible, and the water stop rubber is soft and elastic; The measuring instrument panel is clear and the pointer is sensitive; The connector shall be firm, the cable shall be free from damage, and the sensing parts shall act flexibly.manual. After the irrigation season, the accumulated water in the reel type sprinkler shall be drained, and the rubber walking wheel shall be padded off the ground. The new reel sprinkler or the reel sprinkler after overhaul shall also be put into trial operation before use.
When the reel sprinkler starts spraying, slowly open the drain valve, start the nozzles one by one, and gradually adjust the pressure to the nozzle pressure rating. It is strictly prohibited to start all nozzles at the same time; When spraying is stopped, the drain valves shall be closed slowly one by one, and all nozzles shall not be closed at the same time. The wiring of the electrical components of the reel sprinkler is firm, safe and well grounded, the melt specification meets the requirements, the display position of the instrument is correct, and the wires and cables are not damaged; The rotating parts operate flexibly, and the operating handle and button work reliably and flexibly; The lubricating parts shall be filled with lubricating oil as required; The emitters shall be installed correctly and firmly; The water pipeline is unblocked; The braking and protection devices are safe and reliable; The tire pressure meets the requirements; During the water test run, the pipe joint is sealed reliably; There are no obstacles affecting the operation in the field.
In case of water supply and shutdown, slowly open and close the valve or water hydrant of the reel sprinkler. During operation, it shall meet the following requirements: first, the pressure at the head and end of the pipeline is within the design requirements; Second, the rotating parts run smoothly without abnormal sound; Third, there is no leakage at the seal; Fourth, the emitter works normally.
In case of any fault found on the reel sprinkler, it shall be eliminated in time. Forced operation is strictly prohibited. After the application of chemical fertilizer, the pipeline shall be cleaned, the residual water in the pipeline shall be drained after the operation, and the reel type sprinkler powered by electricity shall cut off the power supply. If the reel sprinkler does not operate for a long time, wash the pipes and valves, remove sediment and dirt, drain the ponding in the water pump and pipe, remove the soil and weeds at the walking part, and carry out rust