Mixer Machine Construction Equipment Mortar Pump Grout Output Mobile Concrete Mixer With Pump
Cement pump used for bridges, culverts, mines, tunnels and other grouting reinforcement;spraying support; spraying with ashes and wiping inside and outside the wall, the roof. in addition, in the chemical sector, railway construction and other projects, it can be as the equipment for conveying the slurry.used for bridges, culverts, mines, tunnels and other grouting reinforcement;spraying support; spraying with ashes and wiping inside and outside the wall, the roof. in addition, in the chemical sector, railway construction and other projects, it can be as the equipment for conveying the slurry.
UB3C Grout Pump |
||
1 |
Delivery Value |
3m³/h |
2 |
Working Pressure |
1.5MPa |
3 |
Power |
4KW |
4 |
Motor Speed |
1440r/min |
5 |
Outlet Hose Diameter |
32mm |
6 |
Inlet Hose Diameter |
64mm |
7 |
Vertical Delivery Distance |
40m |
8 |
Horizontal Delivery Distance |
150m |
9 |
Weight |
250KG |
10 |
Size(Length x Width x Height) |
1035×480×900mm |
Pressure gauge: shows the pressure index |
|
Motor: to start the electricity, drive the machine operation, sustainable |
|
Slurry outlet: conveying mortar and connecting oil pipe |
|
Gear: drive the shaft, start the motor |
|
Suction channel: connect the mixer and pour the mortar for transportation |
Product Structure :
The mortar pump is composed of a reduction box, a pump body, a pressure relief valve and other parts, which are connected to a base made of channel steel.
Used:
1. Preparation before starting,Check whether the connection parts are loose, whether there is enough oil in the gear box.
2. Check whether the pump, pipe connection is sealed, whether the internal smooth, or the existence of dry gravel, dry ash, nails, vegetation, etc., ball valve, rubber hose is damaged.
3. Check the wire, the fuse is intact, the motor steering is right (clockwise).
4. When using,we should always pay attention to the work of the pressure gauge, when the working pressure is over, stop working. At this time should immediately open the pressure relief ball valve, so that pressure drop, eliminate the trouble and then restart and use.
5.Should always check the connection hose, flange,asbestos cord,so that the pressure does not occur leakage.