PRODUCT NAME | LGB linear gages | ||||||
Feature | 1、 Low measuring force, suitable for measuring soft workpieces. 2、Ultra-fine design, lock nut type (clamping sleeve diameter is ø9.5mm). 3、Ball bearing is used for the measuring rod guide rail, which is particularly durable Type L- Type Slim Type Low Force Type With pneumatics | ||||||
Measuring range | 0-10MM | ||||||
Resolution | 0.001MM | ||||||
Maximum response speed | 380mm / s 900mm / s | ||||||
Force measurement | Stylus up about 0.55N or less about 0.7N or less about 0.5N or less about 0.7N or less Rod level about 0.6N or less about 0.75N or less about 0.55N or less about 0.75N or less Stylus down about 0.65N or less about 0.8N or less about 0.6N or less about 0.8N or less | ||||||
Operating temperature (humidity) range | 0 ~40ºC | ||||||
Accessories | Probe hard ball ø3mm (fixing screw: M2.5 (P = 0.45) × 5) Standard probe No.901312 Clamping sleeve ø8mm Bearing type linear ball bearing Output cable length 2m (extended directly from the main unit) Connector use plug: RM12BPE-6PH (wide), compatible socket: RM12BRD-6S (wide) D-Sub connector 15 stitches,Special wrench for standard accessories probe: No.538610 |
Number | Measuring range | Size |
542-204 | 0-5MM×0.001MM | standard |
542-222 | 0-10MM×0.001MM(Shaft diameter 8MM ) | standard |
542-222H | High precision | |
542-224 | Low force | |
542-230 | Pneumatic device | |
542-223 | ||
542-401 | Sine wave output | |
542-244 | 0-5MM×0.001MM | standard |
542-262 | 0-10MM×0.001MM(Shaft diameter 9.5MM ) | standard |
542-262H | High precision | |
542-264 | Low force | |
542-270 | Pneumatic device | |
542-421 | Sine wave output | |
542-246 | 0-5MM×0.001MM | standard |