Mirror effect finish chrome electrostatic powder paints/ RAL7035 epoxy powder coating

Mirror effect finish chrome electrostatic powder paints/ ral7035 epoxy powder coating

We are a professional supplier of powder coating and we worked in this field for many years

we provide many kind of powder paint, like a hammer, orange lines, grinding, highlights and inferior smooth, crack, flash of gold, silver and other effects, have appeared in recent years, high temperature resistant powder coating powder, powder painting at low temperature, high weather resistance, water resistance, acid powder powder powder, low temperature curing, UV curing powder powder and so on

Features 

1.Good adhesive force and excellent flexibility and other each mechanical  performance
2.Good chemicals resistance and corrosion prevention 

3.Be more excellent than heat-resistance and light resistant stability of pure epoxy powder

4.Can be made into product with each brilliance and color; specific color and brilliance should be designated by users

5. Can be made into each kind of texture product such as ripple, hammer texture, metal effect, cotton like grain and crack etc.

COATING DISCRIPTION 

Chemical type           ; Epoxy/Polyester

Curing Condition      ; 10-15 min/180^oC-192^oC

Adhesion                    ; 100%(ASTM D2794-93)

Hardness                    ;  Minimum 1H-2H(ASTM D2134/93)

Erichsen Cupping    ;  Minimum 8 mm(DIN 53156)

Impact                         ; Direct ,minimum 50kg /cm²

                                   ; Reverse , minimum 40kg/ cm²

Flexibility                  ; Without Breaking

Salt Spray                   ; 500 hours (Zinc Phosfate),Pass no corrosion creep more than 2mm

                                    fromscribe

New and recycled   ; 75% new -25% recycled, without texture loss nor mechanical

coating mixture          Properties  

Chemical Resistance  ;   Good for most acids,alkalines,alcohols and oils at room                                                   

                                        temperature

Use                           ; It is  indicated for decorative and Protective end uses. It has excellent

                                   appearance with improved heat stability and improved  resistant

                                   to Ultra violet light. these powder coatings are not recommended for

                                   Long term exposure to ultra violet light nor aggressive environments.

                                  All the Powders are Used for metal Furniture and This is a Raw Meteril.

Power manufacturing Process:

1. 1.      Mix raw material and auxiliary material for 3-4 min.
2. 2.      Melt extrusion in the machine at the temperature of 110-120 degrees centigrade.
3. 3.      Cooling to room temperature.
4. 4.      Grind the material to be particle.
5. 5.      Grind the particle to be powder.
6. 6.      Mix the powder with additives.(For special plastic powder)
7. 7.      Pack the powder to get the finished product.

Usage:  Used us environmental coating instead of oil paint.

Other Quotation is what are the other Additives 2%: Additives includes increased electric agent, defoamer, micro powder wax additives.

Powder Constituent

Gloss level:

• High gloss (above 85%),

• Flat gloss (50%-85%), 

• Semi gloss (10%-50%) 

• Matt (below 10 %)

Package Specification 

Health & Safety:

1.No hazardous ingredient.

2.No hazardous gas.

3.The inhalation of dusts should be avoided. An operator should wear an anti-dust mask and try best to avoid long time contact with the powder coatings.

4.The coatings stacked on the skin could be washed with soap.

5.Requirement of environment protection: the product doesn’t include arsenic, selenium, lead, hexavalent chromium, mercury,

stibium, cadmium and other heavy non-ferrous metals and is in fully conformity with requirement of RoHS environment protection.