No. | Name | Description |
1 | Main display | Displaying the measured value (measuring mode) Displaying the parameter value (configuration mode) |
2 | Second display | Displaying the content (such as unit, alarm value) controlled by parameter diS2 (measuring mode) Displaying the parameter value (configuration mode) |
3 | Alarm output indicators | Indicating the states of alarm points |
4 | Set SET | In the measuring mode: Hold this button for over 2 seconds to enter the configuration mode. In the configuration mode: when a parameter symbol is displayed, hold this button for over 2 seconds to select next parameter category; when a parameter symbol is displayed, press this button to select next parameter; When modifying parameter value, press this button to save the changed parameter. |
5 | Left ◄ | In the configuration mode: when a parameter symbol is displayed, press this button to display the parameter value; when modifying parameter value, press this button to select the digit to be revised. |
6 | Up ▲ | In the configuration mode: when displaying a parameter symbol, press this button to select the previous parameter (hold this button to select the first parameter of this category); when modifying parameter value, use this button to the increase the value. In the measuring mode: press this button to set the input display value to zero (Note ★); hold this button for over 1 second to display the input display value before zero setting. |
7 | Down ▼ | In the configuration mode: when displaying a parameter symbol, press this button to select the next parameter (hold this button to select the last parameter of this category); when modifying parameter value, use this button to the decrease the value. In the measuring mode: hold this button for over 1 second to reset the peak/valley value to the present input display value. |
Specification | Rating/Condition | ||||||||
Digital input | K | 1-point external digital input, used for zero setting | |||||||
Alarm output | Size 160×80 | T1~T4 | Relay output of alarm point 1 to 4; all SPDT contact relays | 250V AC/3A Resistive load | |||||
Size 96×96 | T1~T2 | Relay output of alarm point 1 & 2; both are SPDT contact relays | |||||||
T3~T4 | Relay output of alarm point 3 & 4; both are SPST contact relays | ||||||||
Size 96×48 | T1~T2 | Relay output of alarm point 1 & 2; both are SPDT contact relays | |||||||
T3 | Relay output of alarm point 3, which is a SPST contact relay | ||||||||
T4 | Relay output of alarm point 4; three SPST contact relays and one SPDT contact relay (Refer to the note for the restrictions on this model) | ||||||||
Size 72×72 | T1~T2 | Relay output of alarm point 1 & 2; one SPDT contact relay and one SPST contact relay | |||||||
T3 | Relay output of alarm point 3; one SPDT contact relay and two SPST contact relays (Refer to the note for the restrictions on this model) | ||||||||
Size 48×48 | T1~T2 | Relay output of alarm point 1 & 2; one SPDT contact relay and one SPST contact relays (Refer to the note for the restrictions on this model) | |||||||
O | OC gate alarm output (voltage smaller than 40V DC and current smaller than 40mA); for alarm relay output, it is omitted. | ||||||||
Analog output | A1 | Current output (4~20)mA, (0~10)mA, (0~20)mA | Photoelectric isolation, Resolution: 1/3000; Load: 600Ω | ||||||
A2 | Voltage output (0~5)V, (1~5)V | ||||||||
A3 | Voltage output(0-10)V | ||||||||
Power supply | B1 | 24V±5% , <50mA | |||||||
B2 | 12V±5%, <50mA | ||||||||
B3 | 10V±5%, <50mA | ||||||||
Communication interface | S1 | RS232(only size A、size B) | Photoelectric isolation, Response time: <500μS (tested); Software selectable protocol (TC-ASCII or Modbus-RTU) | ||||||
S2 | RS485 |
Dear Friends:
Shenzhen Miran Technology Co., Ltd. is the largest supplier of Linear Position Sensors in China .The company was founded in 2003, which is also the first sensor manufacturer in China. Miran specialized in Linear Positon Sensors.
Miran now develops and manufactures a wide range of Linear Position Sensor (brand:MIRAN,LinecSKI,WANSUNG), Wire Rope Potentiometer,Magnetostrictive Liquid Level Sensor,Angular Sensor,Lubricating Pumps(Oil/Grease/Butter),LVDT,Eddy Current Sensor, and many other motion control products to support many different industrial applications.
Miran Products are widely used in injection molding machines,die casting machines,rubber machines,footwear machines,EVA injection machines,bottle blowing machines,woodworker machines, hydraulic machinery,level control, suspension stroke control,construction machinery,seaport machinery,industrial robots,etc.
As a leading manufacturer in China, Miran has the faith to keep our customers in the lead.Miran is approved by ISO9001:2008, CE, CCC, Rohs certifications. Also we are very proud of the following
1. Being among the leading manufacturer we contribute in R&D of related industry, We spend millions every year for developing new tech and new products.
2.We Promise high quality with strict QC. We performed vibration test, low and high temperature test,electromagnetic interference regulatory test,endurance test, and explosion proof test for each product before shipping.
3. Lean Production is intruduced to factory.
4. Excellent performance in on time delivery.
5. Excellent sales & after-sales service.
Miran now provide the service to customize product logo .
If you have any suggestion or question Please let us know.
Http://miran-tech.en.alibaba.com/
Http://www.miransensor.com/
* Inquiry and consulting support.
* Sample testing support.
* Factory visit
* Training to instal and use.
* Quick response to technical problems;