Mining Mobile Rock Drill Horizontal Line Drilling Machine
This Pneumatic Line drilling machine (Mobile rock drill), available for horizontal, vertical and slantwise drilling, are mainly used in dimensional stone quarry to divide large blocks into smaller pieces, which is necessary to asist diamond wire saw machine working.
Advantages
1) It helps you to drill holes on a straight line, so you can save the blocks, increasing the daily output.
2) High drilling efficiency and low energy consumption, low maintenance cost.
3) Automatically operate, save labor cost.
Classification & Specification
1. Light-weight line drilling machine, equiped with rock drill 1*YT28.
For both vertical drilling and horizontal drilling.
2. Medium-weight line drilling machine, equiped with 2 rock drills, YT24 or YT28.
For both vertical drilling and horizontal drilling.
3. Heavy-weight line drilling machine, equiped with 4 hammers YT24 or YT28.
For vertical drilling only.
Model | BL28-A | BL24-2AM | BL28-2AM | BL24-4AH | BL28-4AH | |
Rock drill Type | set | YT28 | YT24 | YT28 | YT24 | YT28 |
Quantity of rock drill | m | 1 | 2 | 2 | 4 | 4 |
Starting drill steel | m | 2.4 | 2.4 | 2.4 | 3.2 | 3.2 |
Following drill steel | 3.2 | 3.2 | 3.2 | 4.8 | 4.8 | |
4.8 | 4.8 | 4.8 | 5.3 | 5.6 | ||
6.4 | 6.4 | 6.4 | 7.2 | 7.2 | ||
Air consumption | L/s | 81 | 135 | 160 | 270 | 320 |
Length of track | m | 4 | 4 | 5.8 | 5.8 | 5.8 |
Weight rock drill excluded | Kg | 230 | 410 | 600 | 1200 | 1300 |
Other Model Show:
Horizontal pneumatic rock drill For your reference
A slide for horizontal drilling with cylinder-operated down feed or chain feed. It is quickly positioned with wedge pins fixing method.It is ideal for drilling horizontal holes on the same plane as the quarry. The rock drill-holding slide is equipped with a central joint allowing fan-shaped drilling and with a bar anchorage allowing fast lateral moving.Horizontal pneumatic drilling units:
1.pneumatic drilling slide with cylinder operated down feed or chain, start drilling with 3200 or 2400 mm drill steel
2.Control panel
3.5000 mm guiding and leveling bar or pipe (optional).
4.Pneumatic rock drill YT28.