Features:
Wireless control LED lamp string, Christmas tree light string, light control switch
Long range working voltage
Ultra low power,High sensitive response
Specifications(Receiver):
Working voltage: DC 3.6V~24V
Maximum load: 2A
Static current: 3.6 mA ~ 5.5mA
Working frequency: 433MHz
Reception sensitivity: ≥ -107dBm
Output: DC3.6V~DC24V
Size: 22.5 mm x 11mm x 8mm (length × width × high)
Mini size support coding format 1527 learning code
Input: DC3.6V~DC24V
Modulation mode:ASK (superheterodyne)
Appearance size: 22.5mmx 11mm x 8mm (length × width × high)
Number of stored remote controls: ≤ 10
Working mode: Momentary, Toggle, Latching Mode
Learning style: Learning Button
Working temperature: -20 degrees 80 degree
Operation Introduction:
About Working Mode:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect
Clearing the Code:
Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.
Learning the Code:(Momentary)
Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds .
Learning the Code: (Toggle)
Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.
Learning the Code:( Latching)
Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control , the indicator lights flicker three times and then off,then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.
Welcome to our store
Shenzhen Sharphy Electronic Co., Ltd
Shenzhen Sharphy electronic is located in shenzhen,
We have our own factory base so to get good quality control and more competitive price.
We supply stable quality product with excellent service and competitive price, won a lot
of approvals and supports from our clients. We sincerely hope to work with you and bui-
ld our long term business relationship.