Material of the Plate and Gasket
Material of Plate | Suited Liquid |
Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil |
Ti, Ti-pd | Sea Water, Saline Water, Mineral Water |
20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution |
Ni | High-temp and concentration caustic soda |
Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid |
Material of Gasket | Operating Temperature ° C | Suited Liquid |
NBR | -15~+135° C | Water, Sea Water, Mineral Oil, Salinous Water |
EPDM | -25~+180° C | Hot Water, Steam, Acid, Alkali |
F26 | -55~+230° C | Acid, Alkali |
TPF | 0~+160° C | High Concentrated Acid, Alkali, High temperature Oil, Steam |
Standard design
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.
Connections are located in the frame plate or, if either or both fluids make more than a single pass within it, in the frame and pressure plates.
Engineer will be sent for the commission work and also be responsible for trainment of customer's workers.
Propellent, composed of several domestic Propellent enterprises, has always been insisting this business philosophy: opening-up and cooperation, mutual improvement with the cooperative partner and growing together with employees.
“Trust us, we can do more” is our enterprise tenet. We devote to provide a heat transfer solution for civil and industrial users in heating, cooling, waste heat recovery. Products we supplied include plate heat exchangers, plate type condensers, air coolers, wide gap plate heat exchangers, welded plate heat exchangers, heat-exchange units, plate type evaporators, air-handling system, water cooling equipment, waste heat recovery integration device, etc. The application scope covers HVAC, chemical, food and beverage, sugar, metallurgy, power, paper, textiles, shipping, and refrigeration, etc.
The superiority of Propellent’s hot and cold exchanging technology comes from its consist high attention to talent cultivation and product research. Propellent values group building and team building pays attention to product performance & quality.
To find more information, you can find on our website: propellentphe.en.alibaba.com
Corresponding certifications can be provided according to the customer's request.
Ellen Wang
+8615132631020 | |
+8615132631020 | |
Skype | +1097054980 |
Tel | +8615132631020 |