Mini Automatic Lss Vertical 50Kg 0.7Mpa Oil And Gas Small Steam Boiler

 DZH Series Biomass Steam Boiler:

Applicable fuel:

   Biomass boiler has a wide range of fuel sources and is a renewable green energy source. It contains almost no sulfur and low ash. Its growth process can absorb all the CO2 generated during the combustion process and achieve zero CO2 emissions. Biomass energy will gradually replace coal and become one of the main energy sources. Biomass fuel includes straw, wood branches, bamboo and wood processing waste, grain shells, fruit shells, sugar residue, oil residue, etc. According to its shape and size, it can be divided into three types: chips (≤3mm), flakes (≤50mm), and blocks (>50mm).

Structural features:

 (1) The arched tube sheet and the threaded smoke tube are used to form the drum, so that the drum is changed from a quasi-steel body to a quasi-elastomeric structure, and the bracing parts in the tube plate area are eliminated, and the stress is reduced. The smoke pipe in the tube sheet is changed from two passes to a single pass, which solves the problem of tube sheet cracks.

 (2) As the lower part of the drum is arranged with the rising pipe row, the dead water area at the bottom of the drum is eliminated, so that the sludge is not easy to deposit, and the high temperature area of the drum can be well cooled, preventing the bulge in the lower part of the drum.

 (3) The use of high-efficiency heat transfer threaded smoke pipes achieves enhanced heat transfer effects, achieves the characteristics of boiler heating and pressure rise quickly, and improves the thermal efficiency of the boiler.

 (4) The structure is compact, and compared with the same type of boiler, the overall size is small, which saves the investment in the infrastructure of the boiler house.

 (5) Stable operation, convenient adjustment, and sufficient output.

 (6) Threaded smoke tube is used to enhance heat transfer, improve heat transfer coefficient and thermal efficiency, because the flue gas has a disturbing effect in the tube. Dust is not easy to accumulate in the smoke pipe, which plays a role of self-cleaning.

 (7) The eight-shaped wall in the furnace and the exit smoke window have a certain effect of reducing dust. The original dust concentration of the boiler is controlled below the standard, which ensures that the smoke and dust emission of the boiler meets the national environmental protection regulations.

 (8) The unique double-layer secondary air design improves the firing conditions of biomass fuels. The independent air chamber is adopted to achieve reasonable air distribution, so that an aerodynamic field conducive to combustion is formed in the furnace, which makes the combustion temperature high, High combustion efficiency.

Performance characteristics:

 (1) According to the fuel characteristics, manual feeding or mechanical feeding is adopted;

 (2) The combustion ignition speed can be controlled by adjusting the speed control secondary air volume;

 (3) Long wood strips (L≤2m) can burn without breaking;

 (4) It is not required to feed evenly.

Advantages of DZH series biomass steam boiler:

 1. The boiler is a single-drum quick-installed three-pass water-fire tube boiler with large heating surface and high thermal efficiency;

2. The advantages of compact structure, reasonable water circulation design, and quick start-up;

3. The domestic advanced activity grate is adopted, which has good energy-saving effect and reduces the workload of installation and maintenance of the grate;

4. Reasonable air distribution in the grate is conducive to fuel burning and improving the efficiency of the whole machine

5. Reasonable air distribution is adopted to increase the effective area of the grate and increase the burning degree of the fuel;

6. The steam quality of the product is high, and the steam dryness is over 96%;

7. The product has multiple interlocking safety protection controls such as pressure, temperature, and water level;

8. The product control system is automatic, highly mechanized, simple and convenient to operate; the overall quick-installation leaves the factory, and the installation is simple.

          LSS Steam Boiler:

Applicable industry:

  Medicine, chemical industry, light industry, textile, building materials, breeding, food and beverage, plastic foam, printing and dyeing washing, rubber processing, paper and paper products, wood processing, hotels, clothing and leather making, etc.

Features:

1. Compact structure and small footprint

  After the precise calculation of our professional engineers, under the premise of ensuring the output of the boiler, the floor space of the boiler is minimized, saving valuable floor space for users and saving investment.

2. Sufficient heat

  The boiler has sufficient heating area, fully absorbs effective heat, low exhaust gas temperature, low heat loss, guarantees sufficient output, and large radiation heating area.

3. Fast steam production and high steam quality

  Due to the characteristics of the LSS series boiler, it only takes 20 minutes to run from cold to full load, which is suitable for working conditions that require frequent starting, and can provide users with steam quickly and in time. The steam is separated by a steam-water separator inside the drum, and the steam dryness is guaranteed.

4. Reliable pressure and water level protection, high safety performance

   The boiler has a small volume space. Therefore, the degree of damage that it may cause is much smaller than other boilers, and it is supplemented by various control protections such as pressure and water level, as well as over-smoke temperature protection, and its safety performance is higher.

5. Quick installation, easy to install

  The LSS series boilers are small quick-installed boilers with low vibration during operation and no special requirements for foundations.

Product advantages:

1. Fast steam production

  It has a small water volume, a fast heat transfer rate, and a fast heating and pressure rise. The equipment can produce steam in about 5 minutes of operation.

 2. Security and intelligence

  It adopts a fully automated computer control cabinet with a high intelligent operating system. It can be started by one button after setting the program, and the water temperature, water pressure, water level and steam pressure of the boiler can be automatically adjusted.

 3. Easy to install

  The boiler steam is assembled and debugged in the production workshop. The boiler is fully equipped. After the boiler is purchased and transported, it can be directly operated after the water, electricity, oil, gas and sewage pipe are connected.

 4. Energy saving and environmental protection

  The fuel used in the oil-gas tubular steam boiler is natural gas, light oil or important, plus a high-performance combustion system, so it has the advantages of energy saving and environmental protection.

 5. High thermal efficiency

  The entire flue gas channel of the fuel-gas tubular steam boiler is inside the boiler body, and an economizer is set at the flue gas outlet, which can further reduce the exhaust gas temperature and improve the thermal efficiency of the tubular boiler.

     Zhengzhou Baite Machinery Equipment Co., Ltd. was established in 2017, mainly engaged in the import and export business of large/medium/small production equipment. The business scope covers 136 countries and regions including Africa, Southeast Asia, the Middle East, Northern Europe, and the Americas. The profound friendship has created the well-known BNT brand in the industry and won the vast international market space!

1.Minimum Order Quantity?

   1 set.

2.Price?

    Competitive Price.

3.Quality?

   Without artificial damage gurantee 1year.

4.Discount?

    More quantity more discount.

5.Pay?

    Wire transfers, L/C, Alibaba Payment,etc.

6.Packaging?

   Professional Suitable Strong packing method.

7.Delivery time?

   Depend on Invoice/Contract.

8.Warranty?

   1year,Waiting to cooperate with you!!

9.After Sales Service Time?

   Monday-Friday 8:30am-12:00am,1:30pm-6:30pm.

Why choose us?

1.Our professional designers design machines according to your needs.

2.Video will be provided to customers.

3.Instruction book with every set of machine

4.Provide vulnerable parts

5.Quick response to any question about the machine

6.Competitive price as direct manufacturer

7.Superior quality

8.Good after-sale service

 After-Sales Service

1.Training how to instal and use the machine.

2.Engineers available to service machinery overseas.

3.Free warranty within one year

4.Our company also provides you with life-long technical support and accessories.

5.If you have some problems when you are using our products, please contact us at any time.