Snap In Vents
Milvent Snap In Vents for ECU,Car Laser Ladar Equipment,WIFI GPS ,Outdoor Lighting Enclosure Application.
Part no. | MIV-15 | MIV-15HA |
Typical airfl ow | 450ml / min (dp = 70 mbar) | 2,000ml / min (dp = 70 mbar) |
Water entry pressure | 0.6 bar / 30 sec | 0.3 bar / 30 sec |
Recommended torque | 0.6 ~ 0.8 Nm | |
Enviromental | 2nd (Protection class) : IP66 · IP67 · IP68 (mmersion : 2 meters / 1h) · IP69K |
milvent.com
100PCS/Bag
We are leading manufacturer for industrial vent plug/protective vents.
We can OEM and customize design for you rapidly.
MILVENT is a manufacturer of protective vents for electronics and industrial devices.
We are one of the Chinese leading protective vents manufacturers offering various, high-quality, and customized protective vents.
We provide wide range of electronics, industrial enclosure:such as M12 LED vent plug,screw-in vents,snap fit vents,tank vents,adhesive vents,Fit vents,air vavle, etc
Do you have M10,M8,M6,M5 different sizes of vent plug?
Yes, we can OEM for you in a short time. And the tooling fee is free.
Selling Units: | Single item |
Single package size: | 10X10X10 cm |
Single gross weight: | 0.02 KG |
Package Type: | 100pcs/bag |
If You Would Like To Know More About The Dustproof And Waterproof Ventilating Valve Scope Of Use, Please Contact Customer Service.
Why Use Dustproof And Waterproof Ventilation Cable Gland ?
Electronic Enclosures face a Wide Range Of Environmental Hazards , Such As The Failure Of The Product enclosure Seal, The Condensation Of Water Vapor Inside The enclosure could be stay for a long time,That Can Affect The Performance, Reliability And Life Expectancy Of The Sensitive Electronics Within.
Reliable Solutions With Milvent Protective Vents :
Pressure Differentials In Enclosures With a High Degree Of Protection Are a Result Of Internal And External Temperature Changes.In The Case Of Negative Pressure Or Partial Vacuum,Dust And Humidity Can Enter The Enclosure Through The Door Seal.
When The Air Inside The Enclosure Cools Down,Condensation May Occur Because The Humidity Cannot Escape The Enclosure.The Innovation And Easy-To-Install Ventilation Cable Gland Miv-Ca Enables Secure Cable Entry Into An Enclosure With Simultaneous Pressure Compensation (Protection Type Ip66/Ip67).Even With a Slight Overpressure,a Waterproof Filter Inside The Gland Allows The Humidity To Escape Whilst Blocking Water And Dirt From Entering The Enclosure.
Installation suggestion :
1. Make hole cut-out in enclosure and secure ventilation cable gland with lock nut .
2. Make sure mounting surface is clean and free of oil and other contaminants.
3. Vents should be mounted on flat, vertical surface for best performance.
4. Installation torque can not exceed the specified range.
Focus On Waterproof Breathable Solutions
Milvent Is a Professional Manufacturer And Exporter That Is Concerned With The Design, Development And Production Of Waterproof And Air Permeable. We Are Located In Guangdong, China,With Convenient Transportation Access. All Of Our Products Comply With International Quality Standards And We Have Gained a Global Sales Network Reaching Usa,Australia,Italy, Korea,Etc.
Our Well-Equipped Facilities And Excellent Quality Control Throughout All Stages Of Production Enables Us To Guarantee Total Customer Satisfaction.
If You Are Interested In Any Of Our Products Or Would Like To Discuss a Customer Order,Please Feel Free To Contact Us. We Are Looking Forward To Forming Successful Business Relationship With New Clients Around The World In The Near Future.