Microwave Continuous Belt Kitchen King Shahi Paneer Sabji Chole Masala Powder Flour Sterilization Machine

Microwave Continuous Belt Kitchen King Shahi Paneer Sabji Chole Masala Powder Flour Sterilization Machine

Introduction

The process time of the microwave sterilization equipment is much shorter than the traditional heating and sterilization time. It allows the food to be heated uniformly inside and outside at the same time. Generally, the preheating time required for the food to reach the sterilization temperature is not needed. Moreover, the factors of microwave sterilization are not just thermal factors There are also non-thermal effects. Therefore, according to the characteristics of microwave sterilization that is different from traditional heating sterilization, the following sterilization processes can be used.

1, Intermittent microwave irradiation
  The advantage of the microwave intermittent irradiation method is that it can achieve a sterilization effect with a high electric field intensity in a short time. However, high electric field intensity and power density will place higher requirements on the breakdown resistance of microwave equipment and processed materials, such as the need for precision These requirements, such as controlling irradiation time, will increase the cost of microwave equipment.
2, continuous microwave irradiation

  In order to make up for the shortcomings of intermittent microwave irradiation, a continuous microwave irradiation sterilization process with a lower field strength and an appropriate extension of the microwave irradiation time can be used.
Generally speaking, the power density in the box of the tunnel box type microwave equipment is low, which can be suitable for the above process requirements. Under the premise that the material allows temperature and heating time (heat resistance), appropriately extending the irradiation time will help strengthen the sterilization effect, and at the same time, it can make the material heating state even, so there is enough time to make the material inside and outside with the help of heat conduction. Reduced temperature differences.
3, microwave multiple rapid irradiation and cooling
   The purpose of this sterilization process is to quickly change the ecological environment temperature of microorganisms and sterilize by microwave irradiation for many times, so as to avoid leaving the material continuously at a high temperature for a long time. Advantageously, the process is suitable for sterilization of temperature-sensitive liquids, such as sterilization and preservation of beverages and rice wine. The sterilization temperature conditions can be controlled by setting different sterilization objects.

Technical Parameter of bamboo microwave dryer:

 We will provide best and thoughtful service for you :

1). Free consultation service before, during, and after sales.
2). Free project planning and design services upon clients' special demands.
3). Debugging and inspecting of equipment until everything is functional before leaving the factory.
4). Overseas installation and training of equipment maintenance and operating personally.

Shandong Joyang Machinery Co., Ltd.is a professional supplier of food processing machines. We are located in Jinan, the capital of Shandong Province. Our company is full of staff with many years of experience in supplying the food process machines.

Our main products include hot air drying machine, tunnel microwave machine, cabinet microwave machine, vacuum microwave machine, thawing microwave machine, drying and sterilizing microwave machine etc. Our machines are customized machines , our professional engineers will supply the most suitable solution to different customers to meet their various demands.

We have developed the "JY" series food processing machine in various specifications in accordance with CE,GMP, FDA,QS standards.

1. Daub coal oil on the surface of the machines.
2. Plastic film as the inner packing.
3. Standard export wooden case as the outer packing.
4. Train, ship or depend on clients' requirement.

1. What's the materils?
 Answer: Stainless steel.

2. How long is your gurantee time?
 Answer: One year after comissioning.

3.How is the installation?
Answer: When the machine arrives at the your workshop, we send 1~2 engineers to install the machine and teach the workers how to use. There be a operate mannual and Equipment maintenance manual.

4.How is the payment?
Answer: 40% TT as downpayment, 60% TT or L/C before shipment. Before shipment,welcome to inspect the machine.