Our FFC cable, the material is sufficient. The wires include PET film, conductor, support tape, absorbing material and other auxiliary materials. The specific parameters of each component are as follows: Flexible Flat Wire: 97 mm, 0.5 mm pitch, 3.5mm width, 0.5mm margin; PET film: 0.06mm; Conductor: copper, tin plated, 0.035*0.3mm; Support tape: 0.225mm, blue; Double-sided tape, Silver aluminum foil; Our FFC cable flexible, easy to bend and fold, thin thickness, small size, light weight, simple connection, convenient disassembly, easy to solve electromagnetic shielding. The mechanical properties are very well, including retention force ≥3.5kg; repeated insertion/withdrawal ≤50mΩ; insulation elongation≥60%; insulation tensile strength≥34.3N/m m2, abrasion more than 10000 cycles; withdrawal force≥20N, 10 times; The three functional tests of dielectric strength, flexing test and flame test are all OK. In addition, FFC cable processes strong heat resistance, constant temperature and humidity, cold resistance, winding resistance etc.
FFC Attributes & Parameters |
||||
Items |
FFC Assembly Basic Attribute |
FFC Assembly Parameter |
||
ID |
Model No. |
S19082205-D | ||
Flat Wire |
Conductor |
Materials |
Bare copper |
|
Conductor gauge |
Ct*Cw=0.035*0.3Thickness*Width=0.035*0.3 |
|||
Resistance (Ω) |
<2.2Ω/m |
|||
Freeze frame voltage (V) |
60V |
|||
Pitch (p) |
0.5PH |
|||
Pin Number |
8Pin |
|||
Electroplating method |
gold-plated |
|||
Width |
3.5mm | |||
Margin (M) |
0.5mm | |||
Flammability standard |
UL sub.758 VW-1 |
|||
PET Film |
Materials |
Polyester |
||
Thickness |
0.06T |
|||
Printed (can be customized) |
Beautiful E362551 AWM 20861 105℃ 60V VW-1 |
|||
Absorbing material |
Materials |
Polymer-based |
||
conductive cloth |
no |
|||
Acetate cloth |
no |
|||
Damping cotton |
no |
|||
Sound-absorbing cotton |
no |
|||
Resistance temperature film |
no |
|||
Foam glue |
no |
|||
Connector |
Connector Basic Attribute |
Connector A Parameter |
Connector B Parameter |
|
Connector brand |
Qiao Yu |
|||
Support tape |
Materials |
Polyester |
||
Length |
8mm |
|||
Thickness |
0.225T |
|||
Items |
FFC Important Attribute |
FFC Parameter |
||
Mechanical performance |
Stripping strength |
The puller conducts a stripping test at a speed of 25+/-3mm/min |
||
Insertion force |
20gf-Min |
|||
Withdrawal force |
20gf-Min |
|||
Repeated insertion/withdrawal |
Insert and withdraw 20 times with suitable FFC connector at a speed of 10 times/min without damage to the appearance |
|||
Flame retardance |
VM-1 pass |
|||
Bending test |
100000 times (back and forth distance 10mm, 180 times/min) |
|||
Flexible type |
Small volume, high precision, good flexibility, better weldability, and easy to bend |
|||
Aging |
Up to 60℃ at a speed of 22℃/min; down to the normal temperature at a speed of 2°C/min and maintain 96 h |
|||
winding resistant |
100000 times (back and forth distance 10mm, 180 times/min) |
|||
Abrasion-resistant |
Travel 100mm at 60 times/min with a load of 600±5g and conduct abrasion test 10000 times without damage to the appearance. |
|||
Bending |
Manually bend FFC 180°for 20 times |
|||
Electrical performance |
On resistance |
DC3V,0.1mA, no short or open circuit |
||
Contact resistance |
0.38MΩ |
|||
Insulation resistance |
Apply DC 500V to measure the neighboring conductors or between the conductor and the ground. The resistance shall be more than 1000MΩ. |
|||
Rated voltage |
Apply AC 500V, 5mA to measure the neighboring conductors or between the conductor and the ground for one minute and there is no breakdown. |
|||
Rated current |
Current capacity≥0.5A |
|||
Dielectric strength |
Increase the voltage to 1500V gradually in 10s and maintain 1 min. Then decrease the voltage to 750V in 10s. No flash line or breakdown. |
|||
Environmental adaptability |
Salt spray test |
Test time: 48H; saltwater concentration: 5% pressure barrel temperature 35±5℃; pressure barrel pressure: 3kg |
||
Moisture resistance |
Place in the air at 40±2℃ and relative humidity 90-95% for 96 hours, and then return to room temperature for 0.5-2 hours to measure |
|||
Cold resistance |
Place in the air at -40±2℃ for 96 hours, then return to room temperature for 0.5-2 hours |
|||
Heat-resistance |
Place in the air at 80±2℃ for 96 hours, then return to room temperature for 0.5-2 hours. No damage to the appearance |
|||
Temperature cycling |
40℃→+25℃→85°C→+25℃ x 5 Cycle 40℃:4H / 25℃:0.5H / 85℃:8H |
|||
Storage environment |
15°C~25°C |
Certifications
It is suitable for data transmission cables between moving parts and the motherboard, between the PCB board and PCB board, and in miniaturized electrical equipment. It is almost everywhere in modern electrical equipment. For example, printers, scanners, copiers, video cameras, car audio, car airbags, digital cameras, MP3, DVD, VCD, monitors, and other electronic products.
Precautions for use:
Precautions during storage: