Micro air differential pressure meter manometer gauge
Differential pressure gauge used to measure fan and blower pressure, filter resistance, wind speed, furnace pressure, orifice plate differential pressure, bubbles water level and liquid amplifier or hydraulic system pressure. It using frictionless magnetic components, can rapidly measure the micro-pressure air or non-corrosive gases, including positive, negative (vacuum) or differential. No wear, hysteresis and clearance. Not filling, vaporization and freezing. This design has anti-vibration, anti-shake and high overpressure capability, you can guarantee access to high precision. The design impact, shock and overload protection.
Features:
Item |
micro air differential pressure gauge |
Gauge Size |
4"dia. x 2-3/16"deep. |
Accuracy |
±2% of Full scale ( ± 3% on 0,-100Pa,-125Pa,100mm and ± 4% on -00,-60pa,-6mm ranges) |
Range available |
-20 inHg to 15 psig, (-0.677 bar to 1.034 bar) |
Over pressure |
Relief Plug opens at approximately 25psig(1.72bar) standard gauges only |
Temperature Limits |
20- 140 °F(-6.67 to 60°C) |
Mounting Orientation |
Diaphragm in vertical position , cousult factory for other position . |
Process connection |
1/8”NPT ,dupliate high and low pressure taps –one pair side and one pair back . |
Standard Gauge accessories |
include two 1/8”male NPT plugs for duplicate pressure taps, two 1/8”male NPT pipe thread to Rubber tubing adapters, and three flush mounting adapters with screws. |
Common Range |
|
Customized Range |
||
0 – 400Pa |
0 – 2.5KPa |
0 – 30KPa |
-1~0~1KPa |
|
0 – 60Pa |
0 – 500Pa |
0 – 3.0KPa |
-15~0~15Pa |
-2~0~2KPa |
0 – 100Pa |
0 – 600Pa |
0 – 5.0KPa |
-30~0~30Pa |
-3~0~3KPa |
0 – 125Pa |
0 – 750Pa |
0 – 8.0KPa |
-60~0~60Pa |
-4~0~4KPa |
0 – 200Pa |
0 – 800Pa |
0 – 10KPa |
-125~0~125Pa |
-5~0~5KPa |
0 – 250Pa |
0 – 1KPa |
0 – 15KPa |
-250~0~250Pa |
-10~0~10KPa |
0 – 300Pa |
0 – 2KPa |
0 – 25KPa |
-500~0~500Pa |
|
How to order
In order to recommend you the most suitable products , please show us following necessary info according to your practical situation.
1. What is your application ?
2.what is your medium ? and working temperature ?
3.what is your requirement on specifications as follow:
pressure range ?
threaded connector?
Output signal?
Electronic connection ?
Whether need cable ?
Accuracy ?
4.feedback us above data and your order quantity.