wire mesh demister(or mist eliminator)is mainly used to separate drops of the diameter between 3μm to 5μm. When the gas with liquid drops rises at a certain speed, passing through the wire mesh on the grid bar, the inertia of the rising drops make them collide with the wire and then adhere to the surface of the wire. The drops on the wire will diffuse and subside. It makes the drops form bigger ones and then flow along the wire to the intertexture of the wire. Because the wire can be humidified, and because of the surface tension of liquid and the capillarity effect of the wire, the drops will become bigger and bigger. They will be separated and fall when their own weight exceed the resultant force of buoyancy of the rising gas and surface tension of liquid. They will flow to the device of the container in the backward position. As long as the speed of the gas is properly controlled and with other proper condition, the efficiency of foam remove will be as high as 97% after the gas pass through wire-mesh demister. The purpose of removing foam will be achieved completely.
Product Materials
AISI201, 202, 301, 302, 304, 304L, 321, 316, 316L, brass, copper, titanium, Alloy 20, monel, nickel, galvanized, iron, nylon yarn, glass fiber and plastic (PP, PC,PE,PVC,PTFE).
Demister is widely used in columns, evaporators, liquid-vapor separators, boilers, and waste gas processing and compressor outlet for eliminating oil in petroleum industry, chemicals industry, metallurgy industry, pharmaceuticals industry, automobile industry and other industry.
Item |
Data |
Material |
Polypropylene (PP) |
Shape |
Round, square, oblong, etc |
Diameter |
300-6000mm |
Thickness |
100mm, 150mm, 200mm |
Remarks: We can provide available in virtually any size or shape, individual styles of PP demister can be supplied to meet specific customer needs. |