Application areas:
The twin shaft shredder can be applied to various industries of waste crushing and recycling
Applicable materials:
Electronic waste, plastic, metal, wood, waste rubber, packaging barrels, pallets, etc.
working principle:
1.The material enters the interior of the shredding box through the feeding system. The box carries the shredding blade. The material is shredded, squeezed, and sheared by the shredding blade. The shredded material is discharged into the lower part of the box.
2.For the two-shaft shredder, the type of blade is different according to different materials. The blade is divided into: one-claw, two-claw, four-claw and multi-claw blades, with thickness ranging from 10mm-80mm. According to the customer's materials and needs to design single-claw or multi-claw and different thickness blades. The installation form of the blade can be divided into: overall installation and detachable installation props (removable blades are recommended for models above XD1000, which is convenient for later blade replacement)
Model |
Power (Kw) |
Knife thickness (mm) |
Rotating speed (rmp) |
Dimensions (L*W*H mm) |
Equipment Weight (kg) |
SG-600 |
7.5+7.5 | 30 | 15-24 | 2800*1300*1850 | 2300 |
SG-800 |
15+15 |
40 |
15-24 |
3200*1300*1950 |
3300 |
SG-1000 |
18.5+18.5 |
50 |
15-24 |
3200*1300*2000 |
5000 |
SG-1200 |
37+37 |
50 |
15-24 |
4000*1400*2300 |
8000 |
1.The main parts are good: high-quality steel plate welding is used to ensure the stability of the equipment under long-term heavy load.
2.Easy to operate: use microcomputer (PLC) for active control, set up start, stop, rotation and overload active rotation control functions, superior performance.
3.Non-pollution: The equipment has low rotation speed, low noise pollution, less dust, and environmental protection standards.
4.High efficiency: The model mechanism is easy to adjust, the maintenance cost is low, and it is economical and practical.
5.Wide application: The thickness of the knife roller and the number of gear teeth can be changed according to different materials.
6.New concept: screening concept, metal separation system can be added.
7.Multiple requirements: The number and thickness of the gear teeth can be replaced at will to meet the user's requirements for material size.
Q1:What is the physical address of your factory ?
A1:Xingou Industrial Park,Gongyi City,Zhengzhou City,Henan Province,China.
Q2:How to get to your factory ?
A2:You can fly to Beijing,Shanghai or Guangzhou airport,then transfer to Xinzheng International Airport,we will pick you up there.
Q3:How long it takes to drive to your factory from Xinzheng airport?
A3:2 hours
Q4:What is the Packing details ?
A4:Plywood case or Wooden case
Packing method can be also changed according to the clients' special requirement
Q5:Payment terms
A5:30% deposit by T/T,70% balance by T/T before shipment
30% deposit by TT,70% balance by L/C is also accepted if customers request