Application:
Melamine powder
Melamine formaldehyde powder resin
Melamine formaldehyde powder
It is widely use for woodworking industry, especial have very strong bonding strengthen on the exterior wood
EA104 melamine formaldehyde powder resin
Product introduction:
Melamine formaldehyde resin glue is mainly used for paper dipping and decorative plate production. However, the durability of dipping glue is short, normally only one week. Powdery product has a longer storage period and is easy for long distance transportation.
Product Properties
Appearance: White fine powder
Fineness:90% passed 80 target screening
Gelation time: (25℃)≥3.0 hours
Storage period:(25℃)≥one year
Instructions Used in wood adhesive:
Allocation proportion: EA104: modifier: flour : water
100 10-30 10-15 60
Glue-coating quantity: 150-160g/m2 (single board), use machine or hand work
Plank moisture: 7-9%
Hot-pressing temperature: 100-130 ℃
Hot-pressing pressure: 8-16 Mpa
Hot pressing time: 0.2-0.5 min/mm (sheet)
Adjustable glue: base on the recommend formula and test, the pot life is inversely proportional to the temperature.
Glue mix
1) Mixture Rate:
Weight: 2 portion powder to 1 portion water
Volumn: 4 portion powder to 1 portion water
2) Dissolved Method
a. Put the powder into a clean container. Add 2/3 water and blend it until all have been dissolved.
b. Add the surplus 1/3 water and mix it about 2 to 5 minutes.
c. The usage time of proper liquor should about 2 hours (Room Temperature)
Glue spread
The glue-spread rate is dependent on the surface of the adherents .Normal glue spread is 200-300 g/m2 .On very smooth surface(e.g medium density fiber board ,MDF) or in foil laminating ,lower glue spread may be used .On the other hand ,e.g on rough veneer surface ,more glue must be applied .
Hot press and basic press time (For example wood thickness :1mm)
80℃ | 100℃ | 120℃ |
3 min | 1 min | 0.5min |
Pressure: >0.2N/mm2
Suggest hot press temperature : 100℃
Each 1mm thickness wood require more 1 minutes hot press time
For example : 1mm thickness plywood need 1 minutes hot press time
2mm thickness plywood need 2 minutes hot press time
Maintenance:
Normally the maintenance time is 8-12 hours , but in winter it must be maintained more than 12 hours over 20°C.
Note:
Relevant standards are measured in accordance with relevant enterprise methods
Package Specification:
Two-ply bags with an inner plastic bag and an outer fabric bag
25kg / bag
Packaging
25kg /plastic bag ,20kg/plastic bag
Some Main Raw Materials imported from Japan
FAQ
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 2-3 days , as our machine could manufacture 24 Tons glue in each 8 working hours
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: