Medical Inflatable Sitting Cushion--anti-bedsore and comfortable sitting

D

Product name

Medical Inflatable Sitting Cushion--

anti-bedsore and comfortable sittingng

Specifications Model:

1,AFT-076-a,single chamber rectangular-shaped,

2,AFT-076-b,single chamber circle-shaped,

3,AFT-076-c, multi-chamber shaped.

The basic dimensions of medical cushion :

1, single chamber circle-shaped:

 Diameter: The inner:12 cm  The outer:40 cm

(deviation: ± 1cm.)

2, single chamber rectangular-shaped,

 Length: 50  width: 33

 length :55  width : 35

 length :60  width : 45

3,multi-chamber shaped.

gas Room length 43 × width 41 cm

 (deviation: ± 1cm.)

Structure and composition of the product performance:

Medical PVC fabric cushion mainly by heat sealing tightly, then with the inflatable nozzle, cloth cover, inflatable ball, rubber tubing, plastic connector combination.

Application:

Suitable for patients and bedridden patients.

Usage:

inflatable ball inflatable recoverable do other inflatable means.

The inflation tube and the gas nozzle connected to the inside of the top open inflatable safety mat, deflated.

Note:

1, when inflated with a pneumatic pump, pay attention to pressure control, can not exceed the maximum pressure.

2, wash with mild detergents to clean the air cushion direct surface to dry.

3, to prevent sharp objects hurt airbags. Storage method used keeping a clean, after using up the dry and ventilated place, pay attention to moisture.

Storage method :

keeping a clean, after using up ,

Keeping in the dry and ventilated place,

pay attention to moisture.

Company Information

 

FAQ