Features:
Applications:
Model Series:
ELG-150-C500 / ELG-150-C700 / ELG-150-C1050 / ELG-150-C1400 / ELG-150-C1750 / ELG-150-C2100
Blank : | IP67 rated. Cable for I/O connection | |||||||
A : | IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer | |||||||
B : | IP67 rated. 3 in 1 dimming function( 0~10VDC, 10V PWM signal, or resistance) | |||||||
DA : | IP67 rated. DALI function | |||||||
D2 : | IP67 rated. Built-in Smart timer dimming and programmable function. | |||||||
BE : | IP67 rated. 3 in 1 dimming function and Auxiliary DC output |
Details:
MODEL | ELG-150-C500B | ELG-150-C700B | ELG-150-C1050B | |
OUTPUT | RATED CURRENT | 500mA | 700mA | 1050mA |
RATED POWER | 200VAC ~ 305VAC | |||
150W | 149.8W | 150.15W | ||
100VAC ~ 180VAC | ||||
105W | 105W | 105W | ||
CONSTANT CURRENT REGION | 150 ~ 300V | 107 ~ 214V | 72 ~ 143V | |
OPEN CIRCUIT VOLTAGE | 315V | 225V | 151V | |
VOLTAGE ADJ. RANGE | Adjustable for A-Type only (via built-in potentiometer) | |||
250 ~ 500mA | 350 ~ 700mA | 525 ~ 1050mA | ||
CURRENT RIPPLE | 5.0% max. @rated current | |||
CURRENT TOLERANCE | ±5.0% | |||
AUXILIARY DC OUTPUT | Nominal 15V(deviation 11.5~15.5V)@0.4A for BE-Type only | |||
SET UP TIME | 1600ms/115VAC 500ms/230VAC | |||
INPUT | VOLTAGE RANGE | 100 ~ 305VAC 142 ~ 431VDC | ||
FREQUENCY RANGE | 47 ~ 63Hz | |||
POWER FACTOR | PF≥0.97/115VAC, PF≥0.95/230VAC, PF≥0.92/277VAC@full load | |||
TOTAL HARMONIC DISTORTION | THD< 20%(@load≥50%/115VC; @load≥60%/230VAC; @load≥75%/277VAC) | |||
EFFICIENCY | 92% | 92% | 92% | |
AC CURRENT | 1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC | |||
INRUSH CURRENT | COLD START 65A(twidth=485us measured at 50% lpeak ) at 230VAC;Per NEMA 410 | |||
Max. No. of PSUs on 16A CIRCUIT BREAKER | 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | |||
LEAKAGE CURRENT | <0.75mA / 277VAC | |||
NO LOAD / STANDBY POWER CONSUMPTION | No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / DA-Type |
|||
PROTECTION | SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 320 ~ 360V | 230 ~ 265V | 155 ~ 180V | |
Protection type : Shut down o/p voltage, re-power on to recovery | ||||
OVER TEMPERATURE | Shut down o/p voltage, re-power on to recovery | |||
ENVIRONMENT | WORKING TEMP. | Tcase= -40 ~ +85°C | ||
MAX. CASE TEMP. | Tcase= +85°C | |||
WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||
STORAGE TEMP., HUMIDITY | -40 ~ +80°C , 10 ~ 95% RH | |||
TEMP. COEFFICIENT | ±0.03%/°C (0~60°C) | |||
VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||
SAFETY & EMC | SAFETY STANDARDS | U8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved | ||
DALI STANDARDS | Compliance to IEC62386-101, 102, 207 for DA-Type only | |||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | |||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |||
EMC EMISSION | Compliance to EN55015,EN61000-3-2 Class C (@load≥60%) ; EN61000-3-3; GB17743, GB17625.1 | |||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) | |||
OTHERS | MTBF | 1098.95K hrs min. MIL-HDBK-217F (25°C ) | ||
DIMENSION | 219*63*35.5 mm (L*W*H) | |||
PACKING | 0.95Kg; 16pcs / 16.0kg / 0.77CUFT |
MODEL | ELG-150-C1400B | ELG-150-C1750B | ELG-150-C2100B | |
OUTPUT | RATED CURRENT | 1400mA | 1750mA | 2100mA |
RATED POWER | 200VAC ~ 305VAC | |||
149.8W | 150.5W | 151.2W | ||
100VAC ~ 180VAC | ||||
105W | 105W | 105W | ||
CONSTANT CURRENT REGION | 54 ~ 107V | 43 ~ 86V | 36 ~ 72V | |
OPEN CIRCUIT VOLTAGE | 115V | 94V | 80V | |
VOLTAGE ADJ. RANGE | Adjustable for A-Type only (via built-in potentiometer) | |||
700 ~ 1400mA | 875 ~ 1750mA | 1050 ~ 2100mA | ||
CURRENT RIPPLE | 5.0% max. @rated current | |||
CURRENT TOLERANCE | ±5.0% | |||
AUXILIARY DC OUTPUT | Nominal 15V(deviation 11.5~15.5V)@0.4A for BE-Type only | |||
SET UP TIME | 1600ms/115VAC 500ms/230VAC | |||
INPUT | VOLTAGE RANGE | 100 ~ 305VAC 142 ~ 431VDC | ||
FREQUENCY RANGE | 47 ~ 63Hz | |||
POWER FACTOR | PF≥0.97/115VAC, PF≥0.95/230VAC, PF≥0.92/277VAC@full load | |||
TOTAL HARMONIC DISTORTION | THD< 20%(@load≥50%/115VC; @load≥60%/230VAC; @load≥75%/277VAC) | |||
EFFICIENCY | 91% | 91% | 91% | |
AC CURRENT | 1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC | |||
INRUSH CURRENT | COLD START 65A(twidth=485us measured at 50% lpeak ) at 230VAC;Per NEMA 410 | |||
Max. No. of PSUs on 16A CIRCUIT BREAKER | 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | |||
LEAKAGE CURRENT | <0.75mA / 277VAC | |||
NO LOAD / STANDBY POWER CONSUMPTION | No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / DA-Type |
|||
PROTECTION | SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 128 ~ 150V | 96 ~ 106V | 82 ~ 92V | |
Protection type : Shut down o/p voltage, re-power on to recovery | ||||
OVER TEMPERATURE | Shut down o/p voltage, re-power on to recovery | |||
ENVIRONMENT | WORKING TEMP. | Tcase= -40 ~ +85°C | ||
MAX. CASE TEMP. | Tcase= +85°C | |||
WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||
STORAGE TEMP., HUMIDITY | -40 ~ +80°C , 10 ~ 95% RH | |||
TEMP. COEFFICIENT | ±0.03%/°C (0~60°C) | |||
VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||
SAFETY & EMC | SAFETY STANDARDS | U8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved | ||
DALI STANDARDS | Compliance to IEC62386-101, 102, 207 for DA-Type only | |||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | |||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |||
EMC EMISSION | Compliance to EN55015,EN61000-3-2 Class C (@load≥60%) ; EN61000-3-3; GB17743, GB17625.1 | |||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) | |||
OTHERS | MTBF | 1098.95K hrs min. MIL-HDBK-217F (25°C ) | ||
DIMENSION | 219*63*35.5 mm (L*W*H) | |||
PACKING | 0.95Kg; 16pcs / 16.0kg / 0.77CUFT |
Mechanical Specification:
Packing:
Shipping:
Strict, professional production and test, large stock for fast shipping
What our Power Supply can do for you?
What Certification do we have?
SUCCESS IS A RESULT OF OUR COMMITMENT TO A QUALITY SERVICE IN PARTNERSHIP WITH OUR CLIENTS
1. What we sell is 100% Genuine Mean Well Power Supply;
2. Small quantity orders acceptable;
3. We will choose the most suitable shipping way for you and inform you the cost advance, decision will be made by you;
4. We have larger stocks and this support us can make a very prompt shipping;
5. To assure you the maximum comfort and satisfaction, we accept pay via T/T, Paypal, Western Union;
6. Price could be negotiated for more and large quantity;
7. Your enquiry will be quickly responsed, we will choose the most suitable products and quote the most competitive price for you.
If you are interested in other models, please hit below links for details....