Features:
Applications:
Model Series:
RST-10000-24 / RST-10000-36 / RST-10000-48
Detailes:
MODEL | RST-10000-24 | RST-10000-36 | RST-10000-48 | |
OUTPUT | DC VOLTAGE | 24V | 36V | 48V |
CURRENT RANGE | 0 ~ 400A | 0 ~ 276A | 0 ~ 210A | |
RATED CURRENT | 400A | 276A | 210A | |
RATED POWER | 9600W | 9936W | 10080W | |
RIPPLE & NOISE | 150mVp-p | 200mVp-p | 200mVp-p | |
VOLTAGE ADJ. RANGE | 23.5 ~ 28.8V | 35 ~ 43.2V | 47 ~ 57.6V | |
Can be adjusted via built-in potentiometer | ||||
VOLTAGE TOLERANCE | ±1.0% | ±1.0% | ±1.0% | |
LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | |
LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | |
SETUP, RISE TIME | 2200ms, 80ms at full load | |||
HOLD UP TIME | 20ms / 230VAC at 75% load 14ms / 230VAC at full load | |||
INPUT | VOLTAGE RANGE | 3ψ 3-wire / 196 ~ 305VAC or 3ψ 4-wire / Y 340 ~ 530VAC | ||
FREQUENCY RANGE | 47 ~ 63Hz | |||
POWER FACTOR | 0.95/230VAC(400VAC) at full load | |||
EFFICIENCY | 89% | 90% | 91% | |
AC CURRENT | 30A/230VAC(3ψ3-wire / ) 18A/400VAC(3ψ4-wire / Y) | |||
INRUSH CURRENT | 150A/230VAC(3ψ3-wire / ) 100A/400VAC(3ψ4-wire / Y) | |||
LEAKAGE CURRENT | <7mA /305VAC(Y 530VAC) | |||
PROTECTION | OVER LOAD | 100 ~ 112% rated output power | ||
User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover | ||||
OVER TEMPERATURE | Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | |||
OVER VOLTAGE | 30 ~ 33.6V | 45 ~ 50.4V | 60 ~ 67.2V | |
Protection type : Shut down o/p voltage, re-power on to recover | ||||
FUNCTION | REMOTE SENSE | Compensate voltage drop on the load wiring up to 0.3V. Please refer to the Function Manual. | ||
CURRENT SHARING | Up to 20000W or (3+1) units. Please refer to the Function Manual. | |||
AUXILIARY POWER(AUX) | 12V on 0.1A(Only for Remote ON/OFF control) | |||
REMOTE ON/OFF CONTROL | By electrical signal or dry contact Power ON:open Power OFF:short. Please refer to the Function Manual. | |||
ALARM SIGNAL OUTPUT | Please refer to the Function Manual | |||
OUTPUT VOLTAGE TRIMMING | Adjustment of output voltage is allowable between 20 ~ 120% by 1 ~ 6VDC external control signal | |||
OUTPUT CURRENT TRIMMING | Adjustment of output current is allowable between 20 ~ 100% by 1 ~ 5VDC external control signal | |||
CURRENT SHARING | AC fail, DC OK, fan fail, OTP. Please refer to the Function Manual. | |||
ENVIRONMENT | WORKING TEMP. | -30 ~ +70°C (Refer to "Derating Curve") | ||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||
STORAGE TEMP., HUMIDITY | -40 ~ +85°C , 10 ~ 95% RH | |||
TEMP. COEFFICIENT | ±0.03%/°C (0 ~ 50°C ) | |||
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||
SAFETY & EMC | SAFETY STANDARDS | U60950-1, TUV EN60950-1 approved | ||
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH | |||
EMC EMISSION | Parameter | Standard | Test Level / Note | |
Conducted | EN55022 (CISPR22) / EN55011 (CISPR11 | Class A | ||
Radiated | EN55022 (CISPR22) / EN55011 (CISPR11 | Class A | ||
Harmonic Current | EN61000-3-2 | |||
Voltage Flicker | EN61000-3-3 | |||
EMC IMMUNITY | EN55024 , EN61204-3, EN61000-6-2 | |||
Parameter | Standard | Test Level / Note | ||
ESD | EN61000-4-2 | Level 3, 8KV air ; Level 2, 4KV contact | ||
Radiated | EN61000-4-3 | Level 3 | ||
EFT / Burst | EN61000-4-4 | Level 3 | ||
Surge | EN61000-4-5 | Level 4, 2KV/Line-Line 4KV/Line-Earth | ||
Conducted | EN61000-4-6 | Level 3 | ||
Magnetic Field | EN61000-4-8 | Level 4 | ||
Voltage Dips and Interruptions | EN61000-4-11 | >95% dip 0.5 periods, 30% dip 25 periods, | ||
>95% interruptions 250 periods | ||||
OTHERS | MTBF | 50K hrs min. Telcordia SR-332 (Bellcore) ; 17K hrs min. MIL-HDBK-217F (25°C) | ||
DIMENSION | 540*424*83.5mm (L*W*H) | |||
PACKING | 23.5Kg; 1pcs/23.5Kg/2.5CUFT |
Mechanical Specification:
Packing:
Shipping:
Strict, professional production and test, large stock for fast shipping
What our Power Supply can do for you?
What Certification do we have?
SUCCESS IS A RESULT OF OUR COMMITMENT TO A QUALITY SERVICE IN PARTNERSHIP WITH OUR CLIENTS
1. What we sell is 100% Genuine Mean Well Power Supply;
2. Small quantity orders acceptable;
3. We will choose the most suitable shipping way for you and inform you the cost advance, decision will be made by you;
4. We have larger stocks and this support us can make a very prompt shipping;
5. To assure you the maximum comfort and satisfaction, we accept pay via T/T, Paypal, Western Union;
6. Price could be negotiated for more and large quantity;
7. Your enquiry will be quickly responsed, we will choose the most suitable products and quote the most competitive price for you.
If you are interested in other models, please hit below links for details....