Use high temperature and oxygen-free copper wire.
High-temperature micro ball-bearing.
The static balance is confirm.
NMH Japanese bearings.
Magnets is 45h sintered ndfeb magnet.
Stator is stacked with silicon steel.
Stainless steel shaft.
Use high temperature and oxygen-free copper wire.
High-temperature micro ball-bearing.
The static balance is confirm.
NMH Japanese bearings.
Magnets is 45h sintered ndfeb magnet.
Stator is stacked with silicon steel.
Stainless steel shaft.
Model No | MTO6374-170-HA-C | Brand | Maytech | ||
KV | 170 | Shaft | 8mm with 3mm keyway | ||
Size | Φ62.6x 69.0mm | Output Shaft Length | 26mm | ||
Max Lipo Cell | 2‐12s Lipo | Motor Weight | 830g | ||
Max Current | 65A | Max Power | 3550W | ||
Rated Current | 60A | Hall Sensor | With Hall Sensor | ||
Idle Current | 1.5A | Max. Pull | 13000g | ||
Motor cable length | 240mm, excluding connector length | ||||
Sensor cable length | 500mm | ||||
With | 4mm golden male connector |