Description
Welcome to TradeChina
Maydos waterproof Ceramic Tile Glue tile Adhesive for ceramic tile
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
Maydos waterproof Ceramic Tile Glue tile Adhesive for ceramic tile
Where to Use
For floor and ground: To bond ceramic tile or building stone.
Advantages
1. Super bonding power, avoid the hollow caused by ceramic tile which contacted with cement;
2. Stable performance, use directly after mix it with water;
3. Strong water retention capacity, no need to soak the tile or wet the wall. Reduce the dosage of adhesive and the load on the building;
4. Good flexibility, resistant to all kinds of impact;
5. Nontoxic, non-radiant, no irritative odor;
6. Special anti-sagging formula, easier application.
1. Super bonding power, avoid the hollow caused by ceramic tile which contacted with cement;
2. Stable performance, use directly after mix it with water;
3. Strong water retention capacity, no need to soak the tile or wet the wall. Reduce the dosage of adhesive and the load on the building;
4. Good flexibility, resistant to all kinds of impact;
5. Nontoxic, non-radiant, no irritative odor;
6. Special anti-sagging formula, easier application.
5℃-40℃Application temperature |
5℃-40℃
|
Bonding Strength(Mpa) | Standard: ≥0.5 |
Thickness | 2-2.5mm |
Dosage | 2.8-3.5kg/㎡ |
Packing | 20kg/bag |
Application Guidelines
1. Surface Preparation:
·The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.
·The new cement mortar surface should be maintained at least 14 days before the application of the adhesive.
2. Application Methods:
·Mix the powder with water at the ratio of 25:6-6.5, and then use electrical blender to stir evenly.
·Keep the mixture for 5 to 10 minutes, and then stir it again to achieve the best result.
·Finally apply the adhesive on the surface with the notched scraper, and then put the ceramic tile on the surface and press.
·Mixing Ratio (powder: water): 25: (6-6.5)
·Application Tools: electrical blender, notched scraper(3X3mm, 4X4mm, 6X6mm, 8X8mm, 10X10mm), horizontal ruler etc.
1. Surface Preparation:
·The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.
·The new cement mortar surface should be maintained at least 14 days before the application of the adhesive.
2. Application Methods:
·Mix the powder with water at the ratio of 25:6-6.5, and then use electrical blender to stir evenly.
·Keep the mixture for 5 to 10 minutes, and then stir it again to achieve the best result.
·Finally apply the adhesive on the surface with the notched scraper, and then put the ceramic tile on the surface and press.
·Mixing Ratio (powder: water): 25: (6-6.5)
·Application Tools: electrical blender, notched scraper(3X3mm, 4X4mm, 6X6mm, 8X8mm, 10X10mm), horizontal ruler etc.
Notes
1. Application temperature: 5℃-40℃.
2. Control the mixing ratio of powder and water strictly to avoid too thick or too thin and damage its performance.
3. Don’t add water into the dry and hard adhesive mixture and use it again.
4. If the surface and tile’s backside is not even enough, apply some adhesive on the tile’s backside to avoid hollowing.
5. Store in a cool, dry and well-ventilated place.
Company Profile
Our Advantages
Certifications
FAQ
1. A manufacturer or a trading company?
As one of The Top 5 paint manufacturer in China, we have many years of experience since 1996 in production and export. Welcome to visit our factory at any time.
2. How about the price ?
We can offer the competitive price which depends on the quantity and payment.
3. I need to make sure the quality and the color .
Our pleasure! We can offer the Free sample and color chart for you to test and choose .
4. If the product is not ideal, what can we do?
We have perfect after-sale service to help complete the construction smoothly.
Even if there are any unexpected thing in the cooperation, we will assist to solve it.
5. What's your MOQ (min order quantity),production period and delivery time?
The MOQ is 200Kg. We accept mixed order.The production period is normally 7-10 days.
6. I want to put my Logo on the packing .
We can accept the OEM, with your detailed requirements.
HOW TO CONTACT US ?
Mr. Martin Liao
WhatsAPP 00856 20 5581 3179
Mob +8613925957396
QQ 312299026
WeChat 312299026
E-mail martin@maydos.cn
martinliao2020@hotmail.com
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier