Maydos Reflective Thermoplastic Powder Paint
Description
Maydos hot melt marking paint is currently being widely used around the world to promote the use of a new road safety marking paint.. Raw material does not contain the volatile components of the coating,, the construction of the powder coating by heating the melting,, use specialized equipment to apply on the road,forming road marking line
after the cooling.
Maydos hot melt marking paint is made of the petroleum resin, EVA, PE,wax,pigments and other materials . It is
powder form at normal temperature,, heated to 180 - 200 ℃ by hot - melt kettle,, while stirring 3 - 5 minutes to
be flow state,and apply to the road to form a solid coating , with a linear full,strong wear resistance and other
characteristics,, the construction of surface spray reflective beads, at night with a good reflective effect, is widely used in highways and urban roads..
Product features
1// Strong adhesion: resin content is reasonable,, add ing special rubber elastomer to primer with super - strong adhesion.. To ensure that it will not fall off when in the construction process..
2// Good a nti - cracking feature : due to temperature changes,, the hot melt marking line is easy to crack in the coating , as add ing enough EVA resin to prevent cracking..
3// Bright color:: use special color material with reasonable ratio and good
4// W eather resistance , l ong exposure outside directly and does not change color..
5// H igh coating rate:: small density,, large volume,, high coating rate .
6// Good stain resistance:: PE wax quality and dosage is the key to impact the feature of anti - fouling, EXXON PE wax is the company's first choice for many years.
Package
25kg/bag
Notice
1.It is strictly prohibited fireworks,, fire or spark splashing the location,, dangerous goods inaccessible.. Smoking,, oven,, welding or spar king electrical equipment,, etc.. are not close.. To be equipped with enough fire extinguisher (ppowder fire extinguisher)) in the emergency when the application quickly..
2. Storage after the paint, primer, thinner containers to be sealed; do not put directly o n the concrete and mud , the paint place s on the liner.. It should use rain cloth to cover i n the construction site,, so that it doesn ’ t suffer from rain y , and use it as soon as possible.. Not allow to storage in high temperature place ;
3. to avoid long - term s torage of paint.. Long - term storage is easy to make pigments precipitate,, fully stir before use the paint.. It s hould follow the principle of first use of the first storage,, otherwise it will cause oxidation of raw materials..
4.Please do not contact the ski n and other skin when carry out operation,if necessary,wear protective clothing and wear gas masks,, protective gloves, etc . Pay attention not to overflow when get solvent from the container.Spay sand If there is a spill;If the paint stick to the work c lothes,, erase away immediately.At the end of the construction,wash your hands thoroughly and rinse your mouth.
How to use
The application standards (marking thickness and reflective coefficient requirements
1.Road marking line paint application thickness: a. 1.8 ~ 2.0mm b.1.5 ~ 1.8mm c.3.0mm
Road marking application thickness requirements are generally 1.8mm; 3.0mm thickness is a special case requirements (generally very few, used in the longitudinal speed line);
2.Parking lot marking line paint application thickness: a.1.5 ~ 1.8mm b. 1.3 ~ 1.5mm Recommended in the thickness between 1.5 ~ 1.8mm; less than 1.5mm thickness, the glass beads sticky will lead to easy to fall;
3.The reflectance on the mark line depends on the glass beads of marking paint containing 10% and 20%; Glass beads containing for mark line paint - reflective type mark line paint, crossed at the same time by another sowing device sowing glass beads to get better reflective effect of higher reflection coefficient, basically applied to municipal road construction; Normal type mark line paint does not contain glass beads, only in the crossed at the same time the glass beads penetrate the standard line and produce a reflective effect on the surface through the sowing device.
Hot melt marking line application process
Melting paint (hot melt) → clean the road → mark the line →apply base oil → apply mark line paint (marking machine) → finishing → complete 3 to 5 minutes.become dry for the mark line
Projects around the world
Do you want to get more details such as TDS,MSDS ? Click here!
You have a constructional project, but you are not sure about the amount of paint. Click here!
1.How can you prove that you are a paint manufacturer rather than a trading company?
As the one of The Top 5 paint manufacturer in China.
We have many years of experience since 1996 in production and export,welcome to visit our factory at any time.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.I need to make sure the quality and the color .
Our pleasure!We can offer the liquid Free sample for you to test and color chart.
4.If the paint is not ideal, what can I do?
We have perfect after-sales service to help to complete the construction smoothly.
Even if there are any unexpected things in your order, we will assist to solve them.
5.What's your MOQ (min order quantity),production period and delivery time?
Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.
6.I want to put my Logo on the packing .
We can accept the OEM, waiting for your details requirement.
Do you have any other questions ?Click here!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier