Max80mA supplier rf dmx/0-10v signal converter

 dmx0-10v signal converter

Thank you for using DMX512 to 0-10V converter, which adopts the advanced micro-computer control technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the 0-10V signal. Output 1~4 Channels for option.

Features of 4CH DMX to 0/1-10V Signal Converter:

1), Automatically adapts input voltage DC15-30V.

2), Input standard DMX512 signal.

3), 4 isolate output channels, to output 0-10V signal.

4), Setting the DMX address freely with Dipswitch.

5), Custom-made available.

Tech-parameter of DMX to 0/1-10V Signal Converter RT2104:

Input Voltage: DC15-30V                  Function:DMX to 0/1-10V signal converter,dimmer driver

Input Signal: DMX512/1990              Output Signal: 0-10V Signal

Control channels: 4CH                      Max output current: 20mA*4CH Max 80mA

DMX512 Socket: RJ45                      0-10V Socket: Screws terminal                    

Work Temp.: 0~70℃                         Protection grade: IP40                      

Gross Weight: 220g                          Product size: L160*W47*H24(mm)

Specifications of DMX to 0/1-10V Signal Converter:

Product Instructions of DMX to 0/1-10V Signal Converter:

1), The driving output interface, with Common V- and CH1+, CH+, CH+, CH+ output for 4channels 0-10V signal option.

2), Set DMX address with dial switch freely.

3), The product RT2104 can be connected in a DMX lighting controlling system before the 0/1-10V dimmable LED lights.Of course it alsocan be used in somewhere appropriate.

 Wiring Diagram:

DMX512 control signal connection:

1), DMX signal cable is shielded twisted pair cable(microphone cable) or three core cable, DMX signal positive, negative in the end, solder or crimp DMX signal cable plug should be paid special attention to the polarity.The input interface and corresponding signal output from the DMX512 controller, signal is negative, and the connection of DE8036 signal.

2), The DMX5000 output and DE8035 transmission line can't exceed 300 meters.

3), DMX5000 and DE8036 wiring, lighting by JBLED FLASH software can realize the control and computer on-line,realize unlimited expansion cascade with DMX lamp.

4), Every connected 32 DE8036control, DMX signal must be combined with a signal amplifier (such as: RE2000),cascade cannot be more than 4PCS.

5), At the end of the line, shall be connected to a DMX signal termination (DE8036 dial switch tenth dial can).