Max 6Ax3CH DC12-24V Constant Voltage 0/1-10V Dimming Driver DM9138

This series is 0/1-10V dimmer drivers for led strip and other constant voltage/constant current led lamps,we offer AC/DC input products.No flicker on low brightness.We use logarithmic brightness curve to get smooth and good sense for eyesThey all compatible with products of Lutron, Dynalite, Clipsal,LDS,Osram,Philips,ABB,Schneider,Levition,JUNG,Berker,Be Lichtregler etc.

Features of 0/1-10V LED Dimmer Driver DM9138:

1), The analog voltage DC 1-10V dimming, dimming passive and active1-10V universal, with large control system. The modulated light from the structure.
2), 3 channels constant voltage output dimming control, maximum driving ability of 18A.

3), The PWM driver output, LED output smooth, no flicker.

4), Support active and passive to use.From 0~100% to dimming.
5), The product is provided with a self test function, in the absence of input signal, brightness to maximum output, input short can test whether the product is in work, input short brightness will gradually dark to aminimum. Keep the maximum luminance output open circuit.
6), When the power turn off,it has memory function.

7), Custom-made and 3 years warranty.

Tech-Parameters of 0/1-10V LED Dimmer Driver DM9138:

Input: DC12-24V                Control channels:3CH         Output Current:Max 6Ax1CH

Signal Input:active&passive 0/1-10V signal                   Max Power: 216W(12V)/432W(24V)

Frequence: 500HZ             Work Temp.: -30~70℃        Light gray level: 256
Protection grade: IP40       Gross product: 210g            Product size: L160*W47*H22(mm)

Specifications of 0/1-10V Constant Voltage LED Dimmer Driver Series:

Function Instructions of 0/1-10V Dimmer Driver DM9138:

1, According to the product connection diagram,active 0/1-10V  voltage regulator,or passive 1-10V dimmer,LED load,power by positive and negative to connect to the right port, open the power supply, adjust the 0/1-10V voltage regulator, so as to change the output of the controller, until get the satisfactory of LED output brightness.

2, When the [Analog IN] port breaking, controller all light output; When the [Analog IN] port two terminals short circuit, the output shut down.

Wiring Diagram of 0/1-10V Dimmer Driver:

Product Connection of 0/1-10V LED Dimmer Driver DM9138:

Remarks:

1. Please use the voltage 0/1-10V dimmer curve,otherwise it will smooth dimming directly impact LED. otherwise it will smooth dimming direct impact LED.
2. LED load voltage and controller of power supply, and must be in the input voltage range specified in the product.
3. If a bus is connected with many pieces of DM9138 dimming driver,please confirm the effective with good dimming switch load capacity.