Matte clear coat automotive carbon fiber paint for auto refinish paint car paint
Matte clear coat automotive carbon fiber paint for auto refinish paint car paint
It is a bi-component car refinish paint series, high quality single coat system. It can be cured under room temperature or through low-temperature baking. With the following advantages: fast drying, high hardness, high gloss, bright color, excellent covering power, easy spraying, etc.
| Color | Color chart and customized |
| Mixing Ratio | 1k autobase color:thinner=1:1;
2k autocryl color:hardener:thinner=2:1:(0.2-0.6)
|
| Application | Automotive refinish paint and car paint |
| Feature | Weathering resistant, good coverage and high solid |
| Shelf Life | 2 years in original sealer can in cool and dry place at 20℃ |
Construction Process
1. Car body cleaning, checking
Please use degreaser produced byStrong Chemical"to clean the oil, waxand dirt on the substrate completely.and check the degree of damage andype of coatings
2. Andand modify the feather edge
Please use P80/P120/P180 dry sandingpaper to clean the paint film, the width offeather edge should not be lower than 3cm
3. Spray epoxy primer(if needed)
Epoxy primer is necessary to spray If themetal of damage area is already visibleafter it turns totally dry, scrape puttydirectly without sanding.
4. Scrape and sand putty
According to mixing ratio to add hardenerinto putty, mix and scrape, After it turnsdry, use P80/P120/P180 sanding papefor dry sanding, and use P240-P320sanding paper to sand previous paint film.
5. Dedusting, cleaning and covering
Please use the degreaser produced byStrong Chemical to clean the oil anddirt on car body And cover the area thatdoesn't need to be sprayed.
6. Spray 2K primer surfacer
According to mixing ratio to add hardenerand thinner to mix with primer surfacerspray 2-3 coats. the flash off time is 3-5minutes
7. Sanding 2K primer surfacer
Please use P320-P400 dry sandingpaper with sander to sand, wet sandingwith P600-P800 sanding paper manuallor edge
8. Cleaning, dedusting and covering
Please use the degreaser produced byStrong Chemical" to clean the oil anddirt on car body, and use cloth clean dustand ash. cover the area that doesnt needto be sprayed
9. Spray topcoat or basecoat
According to mixing ration to mix metallicor pear or solid color paint with hardenerand thinner Spray 2-3 coats, flash-off timeis 5-10 minutes. after 10-15 time to spray clear coat
10.Spray clearcoat
According temperature to choose differentclearcoat and add proper hardener andthinner, spray 2 coats. the flash-off timeis 5-10 minutes uf needing to dissolve
11. Drying time of clearcoat
After spraying clearcoat. please wait for15-20 minutes, then make it dry by heator air drying
12. Polishing and waxing
Paint film dried by roast should be polishedand waxed after cooling. P1500-2000sanding paper could be used if needingto sand, then process overall polishing
13. Polish
Wet sand with P2000 grit sandpaperCompound and polish.
Welcome to Forest Paint Co., Ltd. We are 10 years of paint experts. We now have two office in Guangzhou and Zhengzhou, one is the China most developed economic and trade city, another lies in the centre of China. Both of them have convenient global transportation on air, ocean, land and the mature foreign trade environment. Will supply all kinds of industrial paint for you, include the floor paint, include epoxy floor paint, polyurethane floor paint, acrylic floor paint; the epoxy paint, acrylic paint, polyurethane paint, and various heavy-duty series, such as chlorinated polyethylene paint, high chlorinated polyethylene paint, glass flake clay, also have road marking paint, fire retardant paint, high temperature resistance paint, glass paint, wood paint, marine paint and so on.
1. Are you manufacturer or trading factory?
In fact we are the factory more then 10 years, can supply all types of paint.
2. If I do not know which paint to choose, what shall I do?
Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.
3. What’s are your payment term?
We can accept the TT, Western Union, LC, Credit card, and Alipay, and others please contact with us freely.
4. If the OEM is accepted?
Yes, OEM is welcome. We also can do your own logo and package.
5. Can we visit your factory?
You are Warmly welcomed to visit our factory, it would be our great pleasure
6. Do you have more ways to contact with you?
Yes, you can contact with us by mobile/wechat/whatsapp:0086 185 3830 5829.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier