Matek Systems PDB XT60 W/ BEC 5V & 12V 2oz Copper For RC Helicopter FPV Quadcopter Muliticopter Drone Power Distribution Board

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.    
It offers a XT60 socket to connect the LiPo pack conveniently.    
 
Description:
 
General:    
-Input voltage range (3S-4S LiPo operation): 9 - 18V DC    
-Regulated 5V and 12V outputs    
-LED power indicators ( 5V & 12V outputs )    
-6 ESC outputs & 1 pair VCC/GND pads    
 
ESC outputs:    
-Continuous current: 25A*4 or 15A*6    
-Peak current (10 seconds/minute): 30A*4 or 20A*6    
 
BEC 5V output:    
-Designed for RC Receivers, Flight controllers, OSD, and Servos.    
-DC/DC synchronous buck regulator.    
-Voltage: 5.0 +/- 0.1VDC    
-Continuous current: 2 Amps (Max.2.5A 10s/minute)    
-Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)    
-Short-circuit tolerant (5 seconds/minute)    
 
BEC 12V output:    
-Designed for Video TX or FPV camera with linear regulator.    
-The battery should be 4S LiPo (13~18V DC)    
- Voltage: 12.0 +/- 0.3VDC    
-Continuous current: 500mA (Max.0.8A 5s/minute)    
-Short-circuit tolerant (2 seconds/minute)    
 
BEC 12V @ 3S LiPo    
-Output voltage= 3S LiPo voltage -1V    
 
Physical:    
-Dimensions: 36 x 50 x 4 mm (without XT60)    
-Mounting: 30.5 x 30.5mm, Φ3mm    
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)    
 
Features:    
2oz copper, 4-layers &1.6mm PCB.    
Built-in XT60 Socket    
Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant    

Please contact us if you have any requirement!!! 

1. Whenever, we are pleased to get your order and any relevant requests.
2. Ensure the products meet the quality standards.
3. Ensure the goods will be delivered on time.
4. Provide warm and friendly service and after-sale service. 
5. We will reply you within 24 hours.
6. OEM quality and original quality are acceptable.
7. About the warranty, if you have any problem about the goods after received it,you can  tell us on time.We will make sure to give you a satisfactory solution. 
8. For more details and latest price, please feel free to contact us.