Product Description
The Boat Hoist Crane includes the following items: main structure, traveling wheel block, hoisting mechanism, steering mechanism, hydraulic transmission system, electric control system, the main structure for the new type , it can transfer the boat which the height surpass its height. According to different requirements of our customers, the Boat Hoist Crane can handling different tons boat or yacht (10T-800T) from the shore side, it can be used for the maintenance on the shore side or can put the new boat inside the water. It adopts the soft and firm belt to lift the boat, yacht; it will never hurt the surface. It also can put the boat in sequence quickly with small gap between each two boat.
Contact us for more information
Main characteristic of the product
--For the crane traveling, it can move in diagonal direction, it also can steering in 90 degree, it also can put the boat in any designated position according to requirements. --It can adjust the width of the main girder according to the boat in case to handling different side boat. --This hoist own the performance of low expense, high performance, easy to operate and maintenance and so on,. --Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting. --It can make the boat in order quickly,, it also can adjust the gap between each boat according to different condition.
Product Advantages
Because Boat Hoist Crane sride on the ground rather than on overhead runways, they don't require a runway structure.
Nor do they usually require concrete foundations.
1. fast and simple installation.
2. Depending on the environment and application, gantry cranes can sometimes provide the same material handling capabilities as a comparable bridge crane system, but with a significant cost savings.
3. Simple and compact structure
4. Light weight
5. Steady performance
6. Easy maintenance
7. Less wastage
Product details
Please contact me for customized parameters
Product structure
Boat Hoist Travel Lift crane includes the following items:
---- Door frame
---- Lifting mechanism
---- Lifting point adjusting mechanism
---- Crane traveling mechanism
---- Crane steering mechanism
---- Electrical control system
---- Power and hydraulic system
---- Safety protection device etc.
Technical Parameters
Please contact me for more details
Rated capacity |
100 |
150 |
200 |
300 |
||
(kg/cm2) |
11.5 |
11 |
11.5 |
6.5 |
||
(m/min) Grade ability |
2% |
4% |
4% |
4% |
||
(m/min) |
Full load |
0~2 |
0~1 |
0~2 |
0~1 |
|
Non-load |
0~5 |
0~4 |
0~3 |
0~3 |
||
(m/min) Running speed |
Full load |
0~20 |
0~20 |
0~20 |
0~20 |
|
Non-load |
0~35 |
0~35 |
0~35 |
0~35 |
||
Working Ambient temperature |
-20℃~+50℃ |
-20℃~+50℃ |
-20℃~+50℃ |
-20℃~+50℃ |
What's your phone number and email address?We'll give you our best offer!
NUCLEON meets the factory, workshop, port, mining, waste disposal, goods scattered, petrochemical, aerospace, military and other industries of universal bridge crane, overhead crane, eot crane, door crane, universal gantry crane, rubber tyre and rail mounted container gantry crane four link type portal crane, quayside container crane, crane, crane hook, mining grab crane, gantry crane, ship loader, grab bucket ship unloader, stacker reclaimer, dredger, mobile platforms and other types of hydraulic crane technical requirements. Achieves great achievements especially in European Style Light Weight Cranes and KBK Flexible Beam Crane System.
Nucleon (Xinxiang) Crane co., ltd., founded in 2005, the registered capital of 270,000,000 CNY, covers an area of 450000 square meters, staff 1700 people. Achieves ISO production system certification and europe standards like DIN & FEM.Nucleon is a bridge, gantry crane, coal series hoisting equipment, small light lifting equipment and other products of research and development, manufacture, installation, sales and service as one of the Sino-foreign joint ventures. The ND, NH model wire rope electric hoist, NL type chain electric hoist, mine explosion-proof hoist, HD type electric single-girder, NLH type electric hoist bridge crane in the domestic leading level, the electric hoist production for many years ranking second in the country.
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
2. Main beams, end beams and trolly/winch are packed by plastic woven cloth. It can reduce abrasion during the transportation.
3. If the size are suitable for container ship, usually by container.
4. Big size, usually by bulk ship or by container after truncation.
5. Transport ways are based on reducing cost & keep safety.
Company main products has been widely used in metallurgy, electric power, petrochemical, military industry, coal, aerospace, construction, railway and other national economic pillar industries. Products are exported to Europe, Africa, Southeast Asia, more than countries and regions. Customers are satisfied with the products quality and service. They comment NUCLEON?a supplier worthy of cooperation!
Just send your inquiry in the textbox below!