Introduction:
1. Marine Sea Water Cooling Self Priming Centrifugal Pump/Marine Fuel Oil Transfer Pump pump may be equipped with diesel engine for wild application.
2. It is special designed for transfer of diesel, kerosene, etc.
3. Pump equipped with explosion proof motor and material of stainless steel or bronze impeller makes sure safe transfer liquids with low flashing point.
4. The diesel transfer pump is mainly used as a fuel off-loading pump, also applied in oil houses, gas stations, oil tankers, tank ships, docks, tank trucks and airports for the transfer of coal oil, diesel oil, aviation fuel and so on.
5. If adopting the corrosion-proof mechanical seal and stainless steel material, it can also be applied for chemical industry, pharmacy, brewage, electroplate, printing and dyeing, paper making, electricity power, mines, etc.
Products details:
Working Principle: | Centrifugal, Self-priming |
Main applications: | Light oil, diesel oil, etc |
Driver: | Electric motor, diesel engine |
Power Specs: | 220/240/380/415V 3phase; 50hz/60hz |
Max.permissible fluid temperature: | 80°C(176°F) |
Type of connection: | Flange, Quick coupled |
Installation position: | Horizontal |
Casing material: |
Cast iron, Stainless steel |
Impeller material: | Cast iron, Stainless steel, Bronze |
Shaft seal type: | Mechanical seal |
Maximum drive rating: | 132KW(175HP) |
Maximum caliber: | 300mm(12nch) |
Maximum discharge-side pressure: | 0.8MPa(8bar) |
Maximum head: | 80m(262.4ft) |
Maximum suction height: | 6.5m(21.3ft) |
Flow rate range: | 3.2-600m3/h(14.1-2640US.GPM) |
Performance data:
Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.