Marine HDPE Plastic Floating pontoon used for Jet Ski Floating Dock

1. HDPE floating dock 
2. Safe and durable 
3. Maintenance free 
4. Environmentally friendly 
5. Easy installing

6. Preference Temperature: -60°C/+80°C.

7.Color available: orange, blue, gray, black.

1.Safety:with patterns on the top surface,Modular Float System is free from dangers 

caused by slippery surfaces,splinters and rusty nails usually found on wooden 

walkways.Also it has no sharp comers and is stable enough to walk on.

2.High Compression: Average compression load is over 1000kg per square meter.

3..Versatility:can be used widely in various fields

4.Economy:free maintenance and low upkeep

5.Convenience /Simplicity of construction: can be easily quickly installed dismantled

6.Durability:resistant to UV rays,frost,seawater,corrosion,chemicals,and oil.

7.Changeability/Resolvability: one connecting pin holds four modules together

permitting the assembly of any size and any configuration on the water the 

assemably can be changed to meet the requirements.

8.Strength:Diagonal lugs’ tensile strength is over 1950kg approved by the offical 

authorities; test speed is 50mm/min.This is the Most Important Item to the quality

because the connecting is the foremost factor to the pontoon’s quality.

Feature

Floating Capacity: 350Kgs/ m2

Raw Material: HDPE with UV 

Preference Temperature: -60°C/+80°C Color available: orange, blue, gray, black

Load Capacity:

each one square meter is made up of four pontoons, top load is 350kgs.

Draft without load: 2.5-3cm;

Draft with load of 150kgs: 15-20cm(safe);

Draft with load of 300kgs:35-40cm(load limit)

Anti Wind Wave:

1.The wave on water surface between 2-class and 3-class belongs to safe applicable range.

2.The wave on water surface between 3-class and 6-class can be applicable; however,the safety protection must be reinforced.

3.The wave on water surface between 6-class and 9-class is the restricted applicable range (it is suggested that the shipping shall not be parked and the visitors shall not be in or out).

Attention: to avoid shaking of the dock, the area of internal lake’s dock is not less than 30 square meter; the area of stage is not less than 100 square meter.

Anchoring:

1.If water is less than 3m in depth, steel piles are to be put in proper place and then connected by wheels, which can prevent the floating dock from moving laterally but can automatically rise and fall in line with water level.

2.If water is over 3m in depth, anchoring can be used by sinking the anchorage block pulled by steel cables to the water bottom.

Guarantee:

Warranty on our floats are 3 years, that is within three years, if there is any damage caused by the product in normal condition, we will replace the floats for you.

1. Offer OEM service for products & packing.
2. Accept sample order and small order.
3. Reply to your inquiry within 1 hours at working time.
4. Real time updating for your order, production and shipping. 

5. Test & inspection of products before delivery.

6. After-sale service: care for customer satisfaction & user feedback.

 Marine HDPE Plastic Floating pontoon used for Jet Ski Floating Dock