2 component polyurethane infusing equipment for leak stoppage
maximum output pressure:
13500psi
packing size:
38*20*49cm
weight:
15kg
Safe range of switch valve:
Less than 10000psi
applicable materials:
PU foam agent,expoxy resin
Pressure of restarting:
Less than 20Mpa/2900psi
theory:
Vacuum Pump
other name:
High pressure grouting machine
place of origin:
GUANGZHOU
Supply Ability
Supply Ability:
10000 Set/Sets per Day
Packaging & Delivery
Manufacturer supply 2 component polyurethane infusing equipment for leak stoppage
QY electric high pressure grouting injection pump is coordinated with foreign machinery industrial manufacturer and is designed sophisticatedly. Considering that it is easy to carry and its lightweight, it is created with wear resistance materials and solid and durable performance, which can also exclude small injection pump's characters of lightweight but high failure rate , difficult maintenance and more minor defects.
High pressure grouting pump is the use of mechanical high pressure, to inject chemical grouting materials to concrete cracks when the slurry quick disperses, emulsify, inflate, consolidate, the elastomer will fill all concrete cracks, which will be completely blocked outside the concrete structure, in order to achieve the purpose of the leakage of water stop.
High pressure grouting pump must be used together with water sealing injection needle and injection grouting foaming agent.
2 component polyurethane infusing equipment for leak stoppage
2 component polyurethane infusing equipment for leak stoppage
2 component polyurethane infusing equipment for leak stoppage
2 component polyurethane infusing equipment for leak stoppage
portable: the body has only 7kg, of small size ,light weight and is easy to carry, and operate
high efficiency: in a few seconds to reach 0 ~ 15000psi work pressure, advanced technology, labor-saving, time-saving and high efficiency.
environmental protection: good mechanical performance, no noise, no pollution
Security: technical, reliable, reasonable structure, use of safety.
the pressure continued: Continuous high-pressure can effectively make PU slurry waterproof agent within the structure of cracks above 0.01mm, micro-suture, micropore, capillary fill plug.
structural nondestructive: directly install the crack near the mouth of grouting machine , not tick slot and bury pipe, no damage to structure.
with water plug: directly inject the grouting material with water for a variety of gap leakage, wave leakage, underground water gushing. 8
supporting the use of a wide range of materials: polyurethane, epoxy resin, acrylic resin, such as the annual non-serous granular materials can be used.
durable: the maximum pressure of 50MPa when the body parts are not deformed. Maintenance simple and easy maintenance, strong and durable, easy to clean.
Scopes of application:
A variety of buildings and underground concrete cracks, expansion joints, construction joints, structural joints .
Subway Station, Tunnel, Culvert, Foundation Improvement, Reservoir, Port Project, Top Slab, Crack, Construction Join, Shrinkage Crack, Basement Hairline Crack, etc., water stop projects.
Specifications:
Weight
7kg
Maximum output pressure
13500psi
Pressure of Restarting
Less than 7500psi
Safe range of high-pressure hose
Less than 13500psi
Safe range of switch valve
Less than 10000psi
the length of hose
5m
theory
Vacuum Pump
Storage and transportation:
Do not expose to heat or sunlight. A cool place is preferred. Capacity of packing: 10-20 kg per barrel.
We value every inquiry sent to us and ensure a quick competitive offer. If you order to us, we can promise the quality.
We put your order into our tight production schedule to ensure you punctual delivery time and send shipping notice to you as soon as your order is shipped. We respect your feedback after you have received the goods. Because we have more than 10 years of experience in waterproof industry, all our products conform to national standard! We can promise an excellent service and a prompt delivery! Your order is welcome at any time!
Q: Do you charge for the samples? According to our company policy, the samples are free, we only charge the freight. And we will return the freight if you set the order .
Q: Can you produce the product according to customers' requirements ? Sure, we are professional manufacturer, OEM is welcome.
Q: Can you tell me your main customers? That's our customers' privacy, so we should protect their information. At the same time, please rest assured that your information is also safe here.
Q: Are you a factory or a trading company? Factory.
Q: What about the quality? We can provide you samples for quality inspection. If you order to us ,we must promise the quality , if some quality problem happened, we can have a negotiation of the compensation and sign agreements ,and our after-sales department will perform the duties as the agreements.