Manufacturer aluminum alloy jack 5t horizontal jack 5 tons low position hydraulic automobile jack

Basic operation method
1. Adjust the grip to 90° when not in use and saving floor space.
2. When moving the jack, adjust the grip to 45°, and personnel can push and pull the jack.
3. When aiming at the working position, adjust the grip lever to the horizontal direction, and the position of the jack can be adjusted forward, backward, left, and right.
4. Connect the air source when lifting, the air pump should be more than 0.6 cubic meters, and the pipe diameter should be more than 8mm.
5. Holding the brake lever of hand, you can adjust the angle of the grip.
6. Adjust the three gears on the switch as needed.
7. The extended roof should be placed every time it is used to avoid the direct contact between the car body and the oil cylinder to cause damage to the oil cylinder.
8. The amount of refueling should be the same as that of the refueling port when the jack is lying flat

 Model K-560
Type horizontal jack
Lifting weight 5 (T)
Minimum height 100 (mm)
Maximum height 533 (mm)
Height-adjustable 0
Processing customization
Net weight 46 (kg)
Scope of application
Structural features hydraulic jack