Specification | ||
Number of feeders | 64 | |
Number of IC tray | 6 | |
Number of cameras | 8 | |
Number of heads | 6 | |
Average power | 500W | |
Positioning precision | 0.01mm | |
The buffer range of suction nozzle | 4.5mm | |
Power supply | 220V, 50/60Hz | |
Compressed air | 0.5-0.6Mpa | |
Drive motor | Panasonic servo motor | |
Vacuum source of suction nozzle | high-speed on-off vacuum generator with vacuum breaker | |
Maximum circuit board area | 600×455mm | |
Maximum travel scope in Z axis | 20mm | |
Tape feeder | 8, 12, 16, 24mm and vibration suction (mounting pipe chip) | |
Maximum mounting speed | 12000 Pcs/h | |
Average mounting speed of actual mounting resistance | 9600Pcs/h | |
XYZ drive guide rail | TBI high-precision reloading linear guide rail | |
Motion drive system | Panasonic high-speed DSP drive | |
full-automatic chip mounter operating system independently | ||
Recognition mode | developed by Huawei Guochuang based on Windows | |
Vacuum source of suction nozzle | operating systemand it supports windows xp | |
Element angle | win7 operating system | |
Element angle | 0-360°, synchronous rotation during movement | |
X/Y operation mode | intelligent curve of the linear acceleration and deceleration linkage | |
MARK point positioning | full-automatic (the MARK point can be adjust at will) | |
Intelligent alarm | automatic correction, automatic filling, feeding shortage alarm | |
Plate entering mode | automatic connection from left to right in single sections | |
automatic PCB transfer positioning. /plunger positioning | ||
manual plate feeding. | ||
Visual display | 17-inch industrial control display, 4:3, resolution: 1280 x1024 | |
One Mark recognition camera, four quick-recognition cameras | ||
and one precise-recognition camera | ||
Adaptive to 0201, 0402, 0603, 0805, 1206, diode, audion, SOT, QFP | ||
within 40*40mm and the pin distance ≥0.3mm | ||
(0.5mm center distance) and BGA | ||
Product weight | 500KG | |
Dimension | 1450*1370*1550mm |