Manufacture thermal spray wire zn-al wire
Manufacture thermal spray wire zn-al wire
ZnAl2, ZnAl4, ZnAl15 (other alloys on request)
Standard diameters: 0.8mm - 5.0 mm according to DIN EN 14919:2001
Package: 25kg/Bundle 15kg ~20kg/Spool 50kg —250kg/Barrel
Pure Zinc Wire: 0 VOC Coating. Melting Point: 787°. Bond Strength aim is 500 psi. Max Service Temp is 140°. Coating coverage estimate per pound @ 6 mils thickness is 3.5 sq. foot per pound.
98/2 Zinc/Aluminum Wire: an alloy of 98% zinc and 2% aluminum by weight. Used as a coating sprayed onto steel, the alloy produces a coating with the best anti corrosion characteristics of both metals for optimum corrosion protection along with many uses as a solder wire. Melting Point: 800° Bond Strength: 600 psi. Max. Service Temp est 180°.0 VOC Coating.
96/4 Zinc/Aluminum Wire: an alloy of 96% zinc and 4% aluminum by weight. Used as a coating sprayed
onto steel, the alloy produces a coating with the best anti corrosion characteristics of both metals for optimum corrosion protection along with many uses as a solder wire. Melting Point: 800° Bond Strength: 600 psi. Max. Service Temp est 180°.0 VOC Coating.
85/15 Zinc/Aluminum Wire: an alloy of 85% zinc and 15% aluminum by weight. When sprayed onto steel, the alloy produces a coating with the best anti corrosion characteristics of both metals for optimum corrosion protection. This corrosion resistance alloy is especially effective on steel against sodium chloride (salt), sulfur dioxide and marine environments.Melting Point: 824° Bond Strength: 700 psi. Max Service Temp. 600° f. Coverage per pound @ 6 mils: 4.3 sq. ft./lbs. 0 VOC Coating.
Key benefits:
- Purity Zn > 99,995%, EN 117921 .
- Low Cadmium content: Cd 0,0002 - 0,0005 = only ca. 50% of the highest content allowed according to EN 117921 .
- Remarkable adhesiveness of zinc .
- Clean and smooth surface of the wire (good electric conductivity and high durability of nozzle) .
Specification for spraying zinc wire
Product name | Diameter | Package | Zinc content | Application |
Zinc wire
| Φ1.3mm | 25kg/Barrel package;15-18kg/Axle package;50-200/Diameter | ≥99.9953 | Applicable to ductile pipes, power capacitors, power towel,towel, container, derrick, bridges gate, tunnel framework, metal stents, large steel structure surface thermal spraying zinc corrosion protection industry. |
Φ1.6mm | 25kg/Barrel package;15-18kg/Axle package;50-200/Diameter | ≥99.9953 | ||
Φ2.0mm | 25kg/Barrel package;15-18kg/Axle package;50-200/Diameter | ≥99.9953 | ||
Φ2.3mm | 25kg/Barrel package;15-18kg/Axle package;50-200/Diameter | ≥99.9953 | ||
Φ2.8mm | 25kg/Barrel package;15-18kg/Axle package;50-200/Diameter | ≥99.9953 | ||
Φ3.0mm | 25kg/Barrel package;15-18kg/Axle package;50-200/Diameter | ≥99.9953 | ||
Φ3.175mm | 250kg/Diameter | ≥99.9953 | ||
Φ4.0mm | 200kg/Diameter | ≥99.9953 |
Application:
SZNK manufactures zinc and zinc/aluminum alloy wires used for Zinc Thermal Spray, often called Metalized Coatings. Zinc and zinc alloy wire sprayed coatings are integral steps in the manufacture of various electronic, capacitor, automotive, heat exchanger and tube & pipe products. Thermally Sprayed Zinc based alloy wire coatings are also used in the Corrosion protection of bridges, locks & dams, above ground storage tanks, light poles, and other critical infrastructure.
Transport:
100 tons pure zinc wire was exported to Germany for capacitor factory.
Why choose our SZNK zinc wire ?
- Adopt superior zinc ingot (99.9953% min) as raw materials and execute ministerial standard & national GB/T470-2008 standard,
- Strictly executes Q/82SZL 01-2009 standard for zinc wire quality.
- Look smooth, no greasy dirt, no crack no mar or scar.
- Advanced testing equipment, implement "three inspection" quality control ( raw material inspection, process inspection, finished goods inspection).
- Highly appraised by clients at home and abroad.
- we can also produce special zinc wire, Zn85Al15 wire, Aluminum wire according to user's requirements.
Q1.Can I have a sample order?
A: Yes, welcome to place sample orders to test and check our quality.
Q2.Do you have any MOQ limt?
A: Our E-cigarettes wire’s MOQ is 1 kg.
Q3.Information needed if I want a quotation?
A Name, Standard, Material Grade(Chemical Composition), Size Quantity, Weight.
Q4. Can we visit your company/factory before place the order?
A. Yes. Welcome anytime
Q5: How does your factory do regarding quality control?
A. Quality is priority. We always attach great importance to quality controlling from beginning to end.
Q6:. How to proceed the order if I have logo to print?
A: 1) Please send us the logo files, once receiving your payment(large order 30%), we will arrange to design the logo;
2)After received your confirmation of the logo, we will do sample and send it to you for checking;
3) If you confirm the sample is ok, we will produce the mass;
4) Once ready, please pay the rest payment and we will send out goods ASAP and tell you the tracking number
Send your inquiry details in the below for free sample, click "send" Now!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier