Made-in-China 3 Hp Electric Boat Motor

The three-phase asynchronous motor of the YE2 series is in line with the third efficiency standard in the provisions of GB 18813-2012 "the energy efficiency limit and the energy efficiency rating of small and medium-sized three-phase asynchronous motors’. And the improvement of the efficiency in its design is in line with the state's requirements on the energy saving and consumption reducing of the manufacturing sector.

YE2 series motors with the mounting dimension in accordance with standard IEC60034, It has good features like optimum structure, attractive appearance, low noise, high efficiency, high protection class as well as high insulation class. YE2 series motors can be widely used in various kinds of general use machineries like fans, pumps, machine tools, compressors, transportation and so on, and can also be used in the hazardous areas with oil and chemical, steel plants, mining industry.

• Site conditions

YE2 series motors are suitable for almost all applications and operate satisfactorily at temperatures from -20℃to +40℃and altitudes up to 1000 meters above sea level

• Temperature and Insulation

The Maters' insulation system are designed by Class F(155℃), operated with Class B(80K). Which incerase the motor useful life and reliability.

• Cooling and ventilation

The standard cooling method is totally Enclosed Fan Cooled (TEFC) it accordance with IC411 of IEC60034-6. Standard motors are equipped with radialflow plastic fans 

• Protection class

The standard degrees of protection is IP55. The IP55 enclosure means complete hoseproof and dustproof protection .A higher degrees of protection is available

• Motor protection

Motors can be installed with PTC, PT100, such as winding and bearing temperature measurement as well as other kinds of protection on request.

• Voltage and frequency

Standard voltage and frequency are 380V 50HZ, and can be wound for any single voltage it the range 200-660V at a frequency 50. The motors will operate satisfactorily with variations of ±5% from the rated voltage.

• Vibration

YE2 motors are designed to vibration class A, vibration class B is available on request.

• Terminal box location

Terminal box at the top or right of frame is the standard YE2 motor.

• Quality assurance

Stringent quality procedures are observed from first design to finished products in accordance with ISO9001 documented quality system.

• Motor working system

This series of motors working system for S1 continuous duty.