1.Working principle
We apply the chrome hammer and manganese alloy plate. When the raw materials enter the crush space, the hammer will carry out the first crush and give the crushed materials a high speed. Then the materials fly to the manganese alloy plate, this is called the second crush or bettering crush. The crushed materials will be output through the discharge hole. And through the sieve, the bigger materials will be conveyed to the crusher and be crushed again, until the size is available.
2.Application
Our Stone hammer crushing machine is mainly applied to stone crusher for construction materials, like road construction, railway and house building and other industries who will use the small stone materials. It is especially suitable to crush limestone, the stone hardness less than 200Mpa and the stone contained more calcium, more or less than 40%.It is designed making use of the inertia of the hammer produced by the motor, to knock the stone into small ones, and it has an impact plate in the back of the crushing cavum to better the materials both in shape and function and make them smaller ones.
3.Durable parts
1, its alloyed hammer. The hammer is perfectly designed and applied hard alloyed materials to cast the main parts. When the crusher is working, it will gain very large inertia to beat the stone into small ones, and throw them to the impact plate for the second crushing and bettering. Its weight and size can gain very high ratio of crushing and low attrition. So it can crush the limestone as the first process and needn't the Jaw crusher.
2, its impact plate. We add a plate in the back of the crushing antrum. So it can process the suitable materials just by on crusher. It needn't the help of impact crusher.
3, its bearing. We applied the fine-steel bearing, and through the hot-oil processing, it is more durable than common bearing. Its super capacity results in its large size mouth. It can crush the stone less than 1100mm for the biggest one.