MU LC FC SC Female to Male and Fixed Fiber Optic Attenuator Singlemode / Multimode 1dB 3dB 5dB 10dB FC SC ST LC MU DIN E2000 MTRJ
Optical attenuators are passive device commonly used in fiber optic communications, either to test power level margins by temporarily adding a calibrated amount of signal loss, or installed permanently to properly match transmitter and receiver levels. Sharp bends stress optic fibers and can cause losses. If a received signal is too strong a temporary fix is to wrap the cable around a pencil until the desired level of attenuation is achieved. However, such arrangements are unreliable, since the stressed fiber tends to break over time.
Parameters |
FC,SC, LC, ST, MU, DIN, E2000, MTRJ, Hybrid |
Attenuation Range |
0dB ~ 30dB SM: 1260-600nm, or 1310nm/1550nm |
Operation Wavelength |
|
MM:850nm, 1310nm |
|
Return Loss |
≤50dB (PC) |
≤55dB (UPC) |
|
≤65dB (APC) |
|
Attenuation Accuracy |
±0.5dB (1 ~ 10 dB) |
±10% of Attenuation Value (11~30 dB) |
|
Polarization Dependent Loss (PDL) |
≤0.2dB |
Exchangeability |
≤0.2dB |
Repeatability |
≤0.2dB |
Durability |
≤0.2dB Typical 1000 matings |
Maximum Optical Input Power |
200mW |
Operating Temperature |
-20 ~ +75°C |
Storage Temperature |
-40 ~ +85°C |
1. Express:
For the sample or the small order quantity from you, we can send the good off immediately after we sign the contract, and we adopt the air express courier.
2. Air shipment:
We can adopt the bulk air shipment for the medium orders. If you have your own agent to collect the commodity at the local airport, this method may be suitable for you.
3. Sea freight
If you give us a larger order and the order is more than 3 cubic meters, we usually adopt the sea freight, it’ll take a longer time to deliver the goods, maybe 20- 30 days.
We can send you paperwork which is required for the customs clearance in case of the different regulation of your country.
4. Normally, our minimum order quantity is 60 m2, just to make sure the commodity's safeness. But it depends on a different condition, any order is welcomed, and we will package the product in the safest way.
5. Payment terms: 30% T/T in advance, the balance paid before shipment.
For the old clients, we can provide the O/A service.
Warranty: We'll be responsible for free replacement if our product itself has quality problems for one year after receiving.
Q: Are you a manufacturer or trading company?
A: We are Origin factory. That's why we are good at making various Metal Enclosure and Cabinet.
Q: Where is your factory located? How can I visit it?
A: Our factory is located in Ningbo, China. 55 Minutes by car from Ningbo Airport.
Q: How can I get the sample? What's the lead time?
A: By DHL/UPS/FedEx express. Samples lead time is 7-14 days.
Q: How does your factory control product quality?
A: ISO9001 Certificated, independent quality control team with 16 inspectors in our factory. The third party certificated and factory audit accepted. Third party quality control accepted.
Q: Do you provide ODM/OEM service?
A: OEM/ODM is welcome, From the concept to finished goods, we have our own designer, do all in the factory.