The MT7603E is a highly integrated Wi-Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. The MT7603E is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.
Features
Technology and package
Compact 7mm x 7mm QFN56L package Platform Embedded high-performance 32-bit RISC microprocessor Highly integrated RF with 55nm CMOS technology Integrate high efficiency switching regulator Best-in-class active and idle power consumption performance Compact 7mm x 7mm QFN56L package LTE Coexistence(UART) Antenna Detection Buffered clock output for co-clock with other SOC chipset Integrate EFUSE to eliminate the requirement for external EEPROM 16 programmable general purpose Input / Output 2 configurable LED pins Auto-calibration Calibration Free(save MP cost)WLAN IEEE 802.11 b/g/n compliant 2T2R mode with support of 300Mbps PHY rate Greenfield, mixed mode, legacy modes support Support MCC(multi channel concurrent) Frame aggregation BW5/10 narrow band(Rx +2.5dBm), extending coverage WoWLAN via GPIO(client mode), Support Host Sleep(AP mode) Airtime Fairness(QoS)
Meet ETSI EN 300 328 V1.8.1 test plan(mandatory for EU in 2014/E) Integrated LNA, PA, and T/R switch IEEE 802.11 d/h/k support Security support for WFA WPA/WPA2 personal, WPS2.0, WAPI Supports 802.11w protected managed frames QoS support of WFA WMM, WMM PS Supports Wi-Fi Direct Per packet transmit power control