MT160 Portable digital ultrasonice thickness gauge ultrasonic thickness gauge a scan with ultrasonic thickness meter probe
MT160 Portable digital ultrasonice thickness gauge ultrasonic thickness gauge a scan with ultrasonic thickness meter probe
Overview
The model MT160 is a digital ultrasonic thickness gauge .Based on the principle of ultrasonic principle, the instrument is capable of measuring the thickness of various materials, such as metal, plastic, ceramic, glass and many other good ultrasonic conductors. It of all kinds of materials. Compared with the traditional measurement methods, the advantages of ultrasonic thickness gauge is exposed to one side of the workpiece to complete the measurement. Its unique non-destructive testing performance provide the perfect solution for the thickness testing of closed pipes, containers, etc. It is widely used in pertroleum , chemical ,metallurgy, shipbuilding, aviation, aerospace and other fields because of monitoring corrosion thinning degree of various pipes and pressure vessels. It can also be used for precise measurement of sheet metal and machined parts.
Technical Parameters
| Display | 4.5 digits LCD with EL backlight |
| Measuring Range | (0.75~300)mm (in Steel) |
| Sound Velocity Range | (1000~9999) m/s |
| Resolution | 0.1mm/0.01mm |
| Accuracy | ±(0.5%Thickness+0.04)mm, depends on materials and conditions |
| Units | Metric/Imperial unit selectable |
| Measurement Frequency | Four measurements readings per second for single point measurement, and ten per second for Scan Mode |
| Storage | Memory for up to 20 files (up to 99 values for each file) of stored values |
| Thickness Measurement Modes | Single point thickness measurement and scanning thickness measurement |
| Power Source | Two “AA” size, 1.5 Volt alkaline batteries |
| Operating Time | More than 100 hours (EL backlight off) |
| Communication | USB1.1(Can communicate with PC ) |
| Outline Dimension | 150mm×74mm×32 mm |
| Weight | 245g |
Features
Suitable for measuring metal (such as steel, cast iron, aluminum, copper, etc.) , plastics, ceramics, glass, fiber glass and any other good ultrasonic conductors;
Dual straight beam probes with different frequencies and crystal sizes are available;
Zero calibration, two-point calibration, automatic error correction system;
Known thickness, sound speed can be measured, in order to improve the measurement accuracy;
Coupling status indicator showing the coupling status;
EL backlight for easy use in dimly lit environments;
Remaining battery indicator can display the remaining power in real time;
Auto sleep and auto power off function to conserve battery life
Small, portable, high reliability for harsh operating environment, anti-vibration, anti-shock and anti-electromagnetic interference.
Working Principle
The digital ultrasonic thickness gauge determines the thickness of a part or structure by accurately measuring the time required for a short ultrasonic pulse generated by a transducer to travel through the thickness of the material, reflect from the back or inside surface, and be returned to the transducer. The measured two-way transit time is divided by two to account for the down-and-back travel path, and then multiplied by the velocity of sound in the material. The result is expressed in the well-known relationship.
Where:
H-Thickness of the test piece.
v-Sound Velocity in the material.
t-The measured round-trip transit time.
To make sure the probe working properly, it needs to use couplant to isolate the air between the probe surface and the measured workpiece surface. The liquid used for the coupling between the probe and workpiece is called as couplant.
Transducer Selection
| Model | Freq | Diam | Measuring Range | Lower limit | Description |
| N05 | 5MHz | 10mm | 1.0mm~230mm (in steel) | Φ20mm×3.0mm | Normal measurement |
| N05/90° | 5MHz | 10mm | 1.0mm~230mm (in steel) | Φ20mm×3.0mm | Normal measurement |
| N07 | 7MHz | 6mm | 0.75mm~80.0mm (in steel) | Φ15mm×2.0mm | For thin pipe wall or small curvature pipe wall measurement |
| HT5 | 5MHz | 12mm | 1.0mm~600mm (in steel) | 30mm | For high temperature (lower than 300℃) measurement |
| N02 | 2.5MHz | 14mm | 3.0mm~200mm (in steel) | 20mm | For thick, highly attenuating, or highly scattering materials |
Configuration
| No. | Item | Quantity | |
| Standard Configuration | 1 | Main body | 1 |
| 2 | Probe: N05 | 1 | |
| 3 | Couplant | 1 | |
| 4 | Instrument Case | 1 | |
| 5 | Operating Manual | 1 | |
| 6 | Alkaline battery | 2 | |
| Optional Configuration | 1 | Probe: N05/90°(5MHz) | |
| 2 | Probe: N02(2.5MHz) | ||
| 3 | Probe: N07(7MHz) | ||
| 4 | Probe: HT5(5MHz) | ||
| 5 | High temperature couplant | ||
| 6 | USB Cable | ||
| 7 | DataPro Software |
Service
1. Pre-sale service
Freely provide project designing, process designing, choosing suitable equipment for you.
2. Medium-sale service
Accompany you to complete the acceptance of the equipment,draft the construction scheme and detailed process, and complete process of export
3. After-sale service
The quality guarantee period of our machine is 12 months.
We will provide necessary information for your purchasing equipment and be very willing to answer all the problems you have concerned about the device.
With the development of technology in our company, we will provide improved working state and information for you at any time.
Within the quality guarantee period, free parts replacement and corresponding service are available.
Beyond the quality guarantee period, we still provide widely and favorable technical support and spare parts supply
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier