Gantry Flame and Plasma CNC cutting machine
Gantry Flame and Plasma CNC cutting machine is mainly used in all kinds of metal plates (such as: carbon
steel, stainless steel, aluminum, low alloy steel, aluminum alloy), but also in the complex pattern of the
above materials Processing.
Technical Specification |
|
Product Name |
Gantry Flame and Plasma CNC cutting machine |
Model |
MS-4B(7012) |
Control System |
Fang Ling F2300A |
Motor |
Panasonic servo motor |
Color |
Red,Blue,Yellow. |
Cutting Mode |
Plasma Cutting+ Flame Cutting |
Flame Cutting Gas |
Oxygen with propane or acetylene |
Plasma Torch Gas |
Compressed air/N2/O2 |
Working Area |
6000mm*10000mm |
Cutting thickness |
0-150mm |
Cutting speed |
0-8000mm/min |
Operation precision |
0.2mm/m |
1.CNC gantry flame cutting is mainly suitable for cutting carbon steel within 5-200mm, and steel plates above 200mm require specific air valves; air pipes; and flame cutting torches
2.Flame cutting can realize automatic ignition device; it can greatly reduce the danger caused by industrial ignition and improve work efficiency;
3.Straight single cutting torch can perform high-precision cutting of 6-200mm carbon steel plates;
4.The straight flame cutting lifting device can manually adjust the cutting nozzle and steel plate scheduling manually;
5.Flame cutting gas source uses oxygen + gas (acetylene, industrial propane liquefied gas)
6.(Depending on the thickness of the steel plate; the size of the cutting nozzle used is different, see the flame and plasma reference table below for details)