Product model | MW1330 |
Total Circuits | 3 rings, 30A/ring |
Working Life | 10 million revolutions |
Rated Voltage | 0~600VAC/VDC |
Rotating Speed | Continuous rotating max 150RPM; Discontinuous rotating max 250RPM. |
Working Temperature | -40℃~80℃ |
Operating Humidity | 0~85% RH |
Contact Material | Precious Metal |
Lead Wires | 30A, AWG12#Teflon |
Lead Length | Standard 300mm |
Dielectric Strength | 500VAC@50Hz,60s |
Torque | 0.1N.m;+0.01N.m/6ring |
Res Noise | <0.01Ω |
Protection Grade | IP51 |
Insulation Resistance | ≥1000MΩ/500VDC |
Standard drawing
How to customize the slip rings?
1. What kind of media do you wanna to transmit?
A: Electricity, gas, Ethernet, fiber optic or hybrid slip rings.
2. For electricity, the details should be provided as below:
a. Total wires? The max current of each wire?
b. How many circuits for signal? The frequency and signal type?
c. Whether the signal is sensitive, if sensitive, does it need shielded?
3. For gas or liquid, the details should be provided as below:
a. What's gas do you need to transmit? Is air?
b. How much pressure?
c. What's size of each port? is G1/4"?
d. What is the maximum torque of slip ring that you can accept?
e. How to install? shaft mounting? flange mounting? end of shaft mounting?
4. For Ethernet, the details should be provided as below:
a. 1000M or 100M?
b. Total wires? The max current of each wire?
c. How many circuits for signal? The frequency and signal type?
d. Whether the signal is sensitive, if sensitive, does it need shielded?
5. For fiber optic, the details should be provided as below:
a. Total wires?
b. Connector type?
c. Type of fiber optic?
d. If need electricity or signals, please answer the Q1.
6. What's the rotating speed and how long does it work continuously per day?
7. May i know the application area(working environment)of the slip ring first?