Welcome to TradeChina
MK-328 Tester Transistor Inductance Capacitance Resistance ESR Meter TEST MOS/PNP/NPN Automatic Detector with Clip Cable
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Products Description
Use the latest M328 version software, more function than M8 version.
The microcontroller adopts 8 MHz external crystals oscillator, better measurement accuracy
The related resistance of affecting the accuracy use 1‰metal film resistor, and the rest also use 1% metal film resistor.
Use backlight low-power consumption LCD screen, compared with the overall power consumption is almost negligible, convenient to
read the data in the dark.
Built-in laminated 9V batteries with external DC power jack, long time using makes more economic.
High quality component and element
Overall dimensions: 125 x80x32 (mm)
Description:
A key operation with automatic shutdown
Battery operation is possible since shutdown current is only about 20nA
Automatic detection of NPN and PNP bipolar transistors, N- and P-Channel MOSFETs, JFETs, diodes, double diodes, unidirectional thyristor and bidirectional thyristor.
Automatic detection of pin layout of the detected part.
Measuring the current amplification coefficient of the bipolar transistor and the voltage of base - emitter threshold Darlington transistors can be identified by the threshold voltage of the high current amplification factor.
Detection the bipolar transistor and the protection diode of MOS
Measuring the Gate threshold voltage and Gate capacity value of MOSFETs.
Up to two Resistors are measured and shown values with up to four decimal digits in the right dimension. All symbols are surrounded by the probe numbers of the Tester. So Potentiometer can also be measured. If the Potentiometer is adjusted to one of its ends, the Tester cannot differ the middle pin and the end pin.
The resolution of the resistance measurement is 0.1Ω, can measure up to 50MΩ
One capacitor can be detected and measured. It is shown value with up to four decimal digits in the right dimension. The value can be from 30pF to 100mF. The resolution can be up to 1 pF
For capacitors with a capacity value above 2µF the Equivalent. Serial Resistance is measured with a resolution of 0.01Ω and shown with two significant decimal digits Up to two diodes are shown in correct order and by diode symbol. Additionally the forward voltages are shown.
LED is detected as diode; the forward voltage is much higher than normal. Two-in-one LEDs are also detected as two diodes.
If Reverse breakdown voltage is below 4.5 V，zener diode can be identified
The microcontroller adopts 8 MHz external crystals oscillator, better measurement accuracy
The related resistance of affecting the accuracy use 1‰metal film resistor, and the rest also use 1% metal film resistor.
Use backlight low-power consumption LCD screen, compared with the overall power consumption is almost negligible, convenient to
read the data in the dark.
Built-in laminated 9V batteries with external DC power jack, long time using makes more economic.
High quality component and element
Overall dimensions: 125 x80x32 (mm)
Description:
A key operation with automatic shutdown
Battery operation is possible since shutdown current is only about 20nA
Automatic detection of NPN and PNP bipolar transistors, N- and P-Channel MOSFETs, JFETs, diodes, double diodes, unidirectional thyristor and bidirectional thyristor.
Automatic detection of pin layout of the detected part.
Measuring the current amplification coefficient of the bipolar transistor and the voltage of base - emitter threshold Darlington transistors can be identified by the threshold voltage of the high current amplification factor.
Detection the bipolar transistor and the protection diode of MOS
Measuring the Gate threshold voltage and Gate capacity value of MOSFETs.
Up to two Resistors are measured and shown values with up to four decimal digits in the right dimension. All symbols are surrounded by the probe numbers of the Tester. So Potentiometer can also be measured. If the Potentiometer is adjusted to one of its ends, the Tester cannot differ the middle pin and the end pin.
The resolution of the resistance measurement is 0.1Ω, can measure up to 50MΩ
One capacitor can be detected and measured. It is shown value with up to four decimal digits in the right dimension. The value can be from 30pF to 100mF. The resolution can be up to 1 pF
For capacitors with a capacity value above 2µF the Equivalent. Serial Resistance is measured with a resolution of 0.01Ω and shown with two significant decimal digits Up to two diodes are shown in correct order and by diode symbol. Additionally the forward voltages are shown.
LED is detected as diode; the forward voltage is much higher than normal. Two-in-one LEDs are also detected as two diodes.
If Reverse breakdown voltage is below 4.5 V，zener diode can be identified
Measurement of the capacity value of a single diode in reverse direction. Bipolar Transistors can also be analysed, if you connect the Base and only one of Collector or Emitter
Only one measurement is needed to find out the connections of a rectifier bridge.
Capacitors with value below 30pF are usually not be detected, but can be measured together with a parallel diode or a parallel capacitor with at least 30pF. In this case you must subtract the capacity value of the parallel connected part.
Can measure inductance resistance less than 2100Ω, the Measuring range is 0.01mH – 20H, but the accuracy is not very good. The measurement result is only shown with a single component connected.
Testing time is about two seconds, only capacity or inductance measurement can cause longer period.
Note: Before the measurement of capacitance, must to discharge the capacitor, otherwise may damage the instrument
Package Included:
1 x MK-328 TR\LCR Transistor LCR Tester Semiconductor Device Analyzer
Capacitors with value below 30pF are usually not be detected, but can be measured together with a parallel diode or a parallel capacitor with at least 30pF. In this case you must subtract the capacity value of the parallel connected part.
Can measure inductance resistance less than 2100Ω, the Measuring range is 0.01mH – 20H, but the accuracy is not very good. The measurement result is only shown with a single component connected.
Testing time is about two seconds, only capacity or inductance measurement can cause longer period.
Note: Before the measurement of capacitance, must to discharge the capacitor, otherwise may damage the instrument
Package Included:
1 x MK-328 TR\LCR Transistor LCR Tester Semiconductor Device Analyzer
Details Images
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier