General Information
MD-480A Phaco Emulsifier is a sophisticated surgical tool designed for ophthalmic surgeons. It is intended to be used only by those surgeons familiar with extra-capsular cataract extraction and/or phaco emulsification. It is designed and manufactured to be reliable, safe and easy to operate.
The operator of the system must read this user's manual carefully and become familiar with all warnings. The warnings contained in this manual are important and must be followed.
Specifications
PHACO EMULSIFICATION
Frequency: 40 KHz, with auto-tuning Handpiece
Power output range: 0~100%
Pulse frequency: 1~ 99Hz; display accuracy: ≤ ±10%
Pulse-Width Modulation: 1~99%; display accuracy: ≤ ±10%
Maximum vacuum: 66.7kPa (500mmHg)
Maximum flux rate: 40cc/min; accuracy: ≤ ±15%
Burst Time: 5~100ms
CAUTERY
Frequency: 1 MHz
Maximum: 10 Watts 20% (Load of 200)
Power range: 0~100%
VITRECTOMY
Single cut or 20 to 600 cuts per minute, pneumatically driven cutter
Maximum vacuum: 66.7kPa (500mmHg)
Maximum flux rate: 40cc/min
IRRIGATION/ASPIRATION
Peristaltic Aspiration
Maximum vacuum: 66.7kPa (500mmHg)
Maximum flux rate: 40cc/min
Reflux rate: 20cc/min 15%
ELECTRICAL REQUIREMENT
Supply: 220 Volts 10%, 50Hz 2%
Rated Current: 3 Amps
Temperature: 0~30C
Relative Humidity: less than 70%
MISCELLANY
Dimensions: 43 cm (W) × 22.5 cm (H) × 32 cm (D) Weight: 8kg
Display: Touch Screen and LCD