1. System capability
• Assembly simultaneously: 2 inlets+3 detectors(FID, TCD, ECD, FPD and NPD)
• Automatic control can be done from local keyboard and networked PC
• Carrier gas control: EPC/AFC
• 8 channels independent temperature control
• Automatic liquid sampling available
2. EPC/AFC gas system
• Carrier and makeup gas settings selectable for He, H2, N2 and Ar
• Psi, KPa, Bar units selectable
• Pressure control range: 1~600KPa, Pressure accuracy: 0.01Psi, Programmable pressure
ramp RSD ≤0.5%
• Flow rate control range: 0~600ml/min, flow rate accuracy: 0.1ml/min, flow rate RSD≤0.1%
• Programmable pressure/flow rate ramping: 8 steps
• Flow sensor accuracy: ≤±3%, detector module accuracy: ≤±7%
3. Column oven
• Column oven dimension: 278×310×165mm=14.2L, accommodate up to 2pcs
105m×0.53mm ID capillary column
• Temp. control range: RT+5℃~450℃(0.1℃ increment)
• Programming temp.-ramp : any step
• Temp. ramp speed: 0.1~120℃≤1 minute
• Fast cool down speed: 350~100℃≤3.5 minutes
• Temp. accuracy: ±0.1℃
• Max run time: 999.99 minutes
4. Inlets
• Packed purge injection port(PPIP)
• Split/splitless capillary port(S/SL)
1. Max temperature: 450℃
2. Split ratio: 4500:1
3. Gas saver mode to reduce gas consumption without compromising performance
4. Programmable temp./pressure ramp: 8 steps
5. Valve injection is available
6. Workstation and data communications
• Windows xp/7 support
• Signal capture from 2 detectors simultaneously
• Sampling frequency: 100Hz
• Sampling speed: 50 times/sec
• Unlimited peak quantity
• Self-diagnosis: intelligent automatic error identification and self-protection
• Can compatible with Clarity to fully support FDA-21CFR PART 11, SST AND IQ/OQ