Heating Temperature: 2500℃
Can be used to welding, melting, forging, hardening etc.
This machine has special requirement for cooling water, please pay attention to this.
Technical Parameters:
Model |
JL-15AB |
|
Input power desire |
Single phase 220V 50/60HZ |
|
Oscillate power max |
15KW |
|
Max input current |
37A |
|
Oscillate frequency |
30-100KHZ |
|
Cooling water desire |
>0.2MPa 2-6L/Min ≤40°C |
|
Duty cycle |
80% |
|
Dimensions(L*W*H) |
Generator |
550*210*460mm |
Transformer |
340*210*320mm |
|
Net weight |
20kg/15kg |
|
Cable length |
2-6(Meters) |
The principle of high frequency induction heating is that apply high frequency alernating current to a conduct that is curled to cyclic (normally copper tube) to produce flux, then put the metal to this area to make the flux to run through it, and eddy current will be generated in the deriction of self-capturing with flux(rotary current), the induced current then generates heat under the influence of the eddy current, so this heating method is called induction heating. hence, metal and other objects under heated can be heated without contact. at this moment, the character of the eddy current relies in that the induction heating on the object nearby the coil is outwardly strong but inwardly weak. with this principle. this heating body can be concentratedly heated where needed to achieve instantly effect, thereby the production output and work capacity are both improved.
Main Parts Introduction
1. Germany SIEMENS INFINEON IGBT Module. 30-100KHZ oscillation frequency, fast response time, superhigh stability, almost spatter-free welding )
2. Japan Nichicon electrolytic capacitor. ( filter capacitor )
3. Imported transistor integrated block.
4. All water pipe use thermostability, High pressure resistance best quality material.
5. Main card, signal circuit, drive circuit board,control circuit board and components are adopted:Toshiba, Hitachi,Motorola, China's top manufacturers.
6. International advanced all-solid-state semiconductor power devices.
7.Technical advantage:perfect control, alarm display circuit, getting full automatic tracking frequency, continuous adjustable power, safe dependable protection,clear and accuracy data display and etc.
8. Superiority Advantages: fast heating, wide application, small size, easy installation, simple operation, low power consumption, high efficiency.
Spare Parts For JL-15AB:
Item |
Name of machine or parts |
Specification |
Amount |
1 |
JL-15KW Generator |
- |
1 pc |
2 |
JL-15KW transformer |
- |
1 pc |
3 |
Foot switch |
3 core |
1 pc |
4 |
Induction Coils |
- |
2 sets |
5 |
Instruction Manual |
- |
1 pc |
6 |
Products Catalog |
- |
2 sets |
High Frequency Series (30-100KHZ)
Model | JL-5 | JL-15 | JL-25 | JL-30 | JL-40 | JL-50 | JL-60 | JL-80 | |||
Input power desire | Single phase 220V 50/60HZ | 3 phase 380V 50/60HZ | |||||||||
Oscillate power max | 5KW | 15KW | 25KW | 30KW | 40KW | 50KW | 60KW | 80KW | |||
Max input current | 20A | 37A | 24A | 38A | 48A | 65A | 80A | 105A | |||
Oscillate frequency | 100-250KHZ | 30-100KHZ | 30-80KHZ | ||||||||
Cooling water desire | >0.2MPa 2-6L/Min | 0.3Mpa≥6L/MIN | |||||||||
Duty cycle | 100% 40°C | 100% 40°C | 100% 40°C | 100% 40°C | 100% 40°C | 100% 40°C | 100% 40°C | 100% 40°C | |||
Net weight | 19kg | 21kg | 28kg | 25kg/23kg | 35kg/30kg | 45kg/30kg | 50kg/30kg | 80kg/85kg |