Low Fuel Consumption ORIEMAC 80 ton Hydraulic Mobile Truck Crane ZTC800V653
Low Fuel Consumption ORIEMAC 80 ton Hydraulic Mobile Truck Crane ZTC800V653
Features:
• A truck crane featuring full circle swinging, telescopic luffing jib and five-section boom subject to hydraulic proportional control;
• Four-axle dedicated chassis, broad vision, simple and generous decorations, 8×4 drive;
• It adopts the latest directional valve and quadruple gear pump system, with such safety devices as overflow valve, balance valve, hydraulic lock and brake valve equipped to prevent oilway overload and avoid accidents due to pipe fracture, ensure that all actuators could give full play to their working ability, and improve the system reliability and safety;
• Such safety devices as torque limiter and complete lighting system are equipped to ensure safe and reliable operation, and facilitate operation at night;
• The complete crane features an innovative design, with its body, line and tint beauty integrated.
Specification:
|
Item |
Unit |
Value |
|
|
Working performance
|
Max. rated lifting capacity |
kg |
80000 |
|
Max. load moment of basic boom |
kN.m |
3116 |
|
|
Max. load moment of max. length boom (fully extended) |
kN.m |
1646 |
|
|
Max. load moment of basic boom |
m |
13.7 |
|
|
Max. lifting height of main boom |
m |
48.8 |
|
|
Max. lifting height of jib |
m |
66 |
|
|
Working speeds
|
Max. hoist rope speed (Main winch) |
m/min |
130 |
|
Max. hoist rope speed (Auxiliary winch) |
m/min |
110 |
|
|
Boom luffing up time |
s |
62 |
|
|
Boom extending time |
s |
145 |
|
|
Slewing speed |
r/min |
0 - 1.6 |
|
|
Driving parameters
|
Max. driving speed |
km/h |
75 |
|
Max. gradeability |
% |
40 |
|
|
Turning diameter |
m |
≤24 |
|
|
Min. ground clearance |
mm |
280 |
|
|
Oil consumption per hundred kilometers |
L |
46 |
|
|
Mass specification
|
Deadweight in driving condition |
kg |
50000 |
|
Complete vehicle kerb mass |
kg |
49870 |
|
|
Front axle load |
kg |
24000 |
|
|
Rear axle load |
kg |
26000 |
|
|
Dimension specification
|
Overall dimensions (L×W×H) |
mm |
15000×2800×3850 |
|
Outrigger spread(L) |
m |
6.38 |
|
|
Outrigger spread(W) |
m |
Fully extended: 8 Intermediately extended: 5.28 |
|
|
Tail slewing radius |
mm |
4390 |
|
|
Main boom length |
m |
12.5 - 48 |
|
|
Boom angle |
° |
-2 - 80 |
|
|
jib length |
m |
10.3-17.5 |
|
|
Offset |
° |
0,15,30 |
|
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier