Low Energy Consumption Heli 2 Ton Diesel/Electric/LPG Forklift In Indonesia
Contact: Marci Yue
Whatsapp/Wechat:+86 15237707724
Low Energy Consumption Heli 2 Ton Diesel/Electric/LPG Forklift In Indonesia
This new series forklift trucks that made with the latest technical design provide you excellent operating performance. HELI forklift trucks high standard performance, comfortable driving experience and the simple and safe operation will make your work handier.
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug
Specification:
| Model | CPCD20 | |
| Power type | Diesel | |
| Load capacity | kg | 2000 |
| Load center | mm | 500 |
| Pallet fork maximum height (with block shelf) | mm | 4039 |
| Maximum lifting height | mm | 3000 |
| Free hoisting height | mm | 145 |
| Overall height (upper frame protection) | mm | 2140 |
| Full length (with cargo fork) | mm | 3430 |
| Full width | mm | 1150 |
| The minimum ground clearance (the door) | mm | 110 |
| The minimum turning radius (outer) | mm | 2170 |
| Least square channel width | mm | 2200 |
| Pallet fork a*b*c | mm | 920*100*45 |
| Maximum speed (full/empty) | km/h | 17/19 |
| Maximum traction(full/empty) | KN | 17/8.33 |
| Rated power | KW/rpm | 35.4/2400 |
| Rated torque | Nm/rpm | 161.3/1600 |
| Total water (oil) | kg |
3480 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier